MAKE IT YOURS
Superior StreetSiren Plus G3.
Wireless siren with advanced sabotage protection and an extended list of compliance certificates. For outdoor and indoor use.
Standards and certifications
Superior StreetSiren Plus G3 Jeweller · SSP.G3.J. Manufacturer-listed marks; regional and installation conditions apply.
See Ajax for the certified model and installation conditions.
An outdoor warning with enhanced wireless security.
Superior StreetSiren Plus G3 Jeweller combines adjustable sound, an LED frame and a protected enclosure with Superior Jeweller communication. Wings provides a separate route for firmware updates. Battery operation and optional external power offer different installation choices, with Grade 3 depending on the complete system.
Key features. At a glance.
- 1The type of indication depends on the specific event. For more information, refer to the user manual.
- 2In standby mode. Up to 4.2 years with one 90-second alarm per day.
Ajax product information ↗ · Superior StreetSiren Plus G3 Jeweller specifications ↗
Protection in real places.
Know what the system is telling you.
Draw attention to an alarm
Choose which system devices should activate the siren and configure its response to tamper and panic events. Sound and light can alert people nearby; notifications and any monitoring response depend on the connected system and service settings.
A gentle signal for everyday arrivals.
Chime while the system is disarmed
A short notification can announce an opening detector being triggered. Configure the siren and the relevant device, then test the event and volume. This signal informs people of an arrival without treating it as an intrusion alarm.
Set the alarm and its visual feedback.
Set the sound for the site
Choose an alarm volume within 85–107 dB at 1 m and a duration from 3 seconds to 3 minutes. Notification beeps can be adjusted separately. Test audibility in the actual space rather than relying only on the maximum figure. Choose the NFA2P or Regular alarm tone for the intended installation.
Keep the warning device connected.
Superior Jeweller
Two-way radio carries alarms, commands and status over an open-space range of up to 3,500 m. The maximum also depends on the hub model. Walls, metal and interference reduce usable range; test reception before final installation.
Requires a compatible hub with OS Malevich 2.35 or later. Check the exact radio region and current compatibility list.
Grade 3 starts with the complete system.
Keep the radio protection consistent
Superior Jeweller provides encrypted communication and enhanced frequency hopping when every connected wireless device supports it. Adding a regular Jeweller device changes the system’s radio behaviour and limits the system to Grade 2.
Grade 3 is not guaranteed by buying one G3 device. An accredited Ajax partner must check the hub, every connected device, radio settings, installation and monitoring requirements together. Check the enhanced-hopping status in the app.
Battery operation with a clear service plan.
Eight CR123A batteries
Calculated life is up to 10 years in standby or up to 4.2 years with one 90-second alarm per day. Alarm use, indication, temperature and radio conditions change actual life. Check battery state in the app.
Keep the siren software current.
Firmware updates over Wings
A separate Wings radio link transfers firmware updates, with an open-space range of up to 2,000 m depending on the hub. Check both radio links, battery state and the current update instructions before starting an available update in the app.
Wings is used for firmware transfer in this siren. It does not add photo capture or video surveillance.
Protection that also watches itself.
Monitor the enclosure and mounting
Two tampers report unlocking SmartBracket and detachment from the mounting surface. Fit the required fasteners and test the event at the end of installation.
Supervise the connection
Regular exchanges allow the hub to detect a missing device and report the affected siren and room. Connection-loss timing depends on the configured polling interval and missed-packet threshold.
Detect sustained radio interference
The siren analyses potential jamming and can activate an audible alarm when it is confirmed. Configure Radio interference detection and verify the notification route. Short environmental disturbances are assessed separately from sustained interference.
Install within the specified conditions.
A protected outdoor enclosure
For outdoor or indoor use from −25 to +60 °C and up to 95% humidity without condensation. The enclosure is rated IP54 and IK08. Preserve its protection when routing cables and closing the mounting.
Place it well. Test the complete response.
Check audibility and visibility
Choose a position where the alarm can be heard and the indication can be seen. Use the exact mounting instructions and permanent fixings, secure SmartBracket, and test removal protection. Avoid a location where the sound could trigger a nearby glass-break detector.
Find the right siren.
Compare indoor and outdoor sirens across Baseline, Superior and Fibra. See how sound, light, power and everyday notifications fit the place you want to protect.
Compare sirens →Every detail, in one place.
Communication
- Superior Jeweller data transfer protocol
- Two-way encrypted radio for commands, alarms and status. Enhanced protection and Grade 3 operation depend on the compatible hub and complete system configuration.
- Frequency bands
- 865.0–868.0 MHz 868.0–868.6 MHz 868.7–869.2 MHz 869.4–869.65 MHz
- Maximum effective radiated power (ERP)
- up to 25 mW Automatic power control to reduce power consumption and noise interference.
- Radio signal modulation
- GFSK
- Radio communication range
- up to 3,500 m Between the siren and a hub (or a range extender) in an open space. The maximum range depends on the hub model.
- Encrypted communication
- All stored and transmitted data are protected by block encryption featuring a dynamic key.
- Frequency hopping
- Full frequency hopping requires all system devices to use Superior Jeweller. With a regular Jeweller device present, the system is limited to Grade 2 and full frequency hopping is disabled.
- Wings communication technology
- Proprietary wireless communication technology for uploading firmware updates. Key features: Two-way communication. Advanced sabotage protection. Block encryption featuring a dynamic key. Data packet reload in case of transmission errors. Data packets delivery check.
- Frequency bands
- 865.0–868.0 MHz 868.0–868.6 MHz 868.7–869.2 MHz 869.4–869.65 MHz
- Radio communication range
- up to 2,000 m Between the siren and a hub (or a range extender) in an open space. The maximum range depends on the hub model.
- Encrypted communication
- All stored and transmitted data is protected with advanced encryption, ensuring both confidentiality and integrity.
- Frequency hopping
- To prevent radio interference and jamming.
Key features
- Alarm type
- acoustic and light A speaker and LED frame.
- Type of warning device
- type X External, self-powered, remote power source with EN 50131-6 compliant power supply.
- Alarm volume
- from 85 to 107 dB at a distance of 1 m Adjusted by a PRO or user with admin rights in the Ajax app.
- Alarm duration
- from 3 s to 3 min Adjusted by a PRO or user with admin rights in the Ajax app.
- Alarm sound
- 2 types NFA2P-compliant and Regular.
- LED indication
- 2 types If the siren has an external power supply, the user can choose between the Corner backlight and Full-frame backlight features. If the siren is powered by a battery, only the Corner backlight feature is available.
- Alarm LED indication in NFA2P-compliant mode
- flashlight color — red flashlight frequency — 1 flash per second
- Siren sound frequency
- 1,400−1,600 Hz in NFA2P-compliant mode 1,400−1,600 Hz in Regular mode
- Device self-test
- Allows you to check whether the battery is sufficiently charged for normal operation.
- Events indication
- Alarms. Delays when entering/leaving. Security mode. Security mode changing. After-alarm indication.
- Chime
- The siren makes a special sound to notify that the opening detectors are triggered when the facility is disarmed.
Sabotage protection
- Tamper alarm
- Notifications on attempts to open the siren’s enclosure, detach the siren from the surface, or remove the siren from the mounting panel.
- Protection against spoofing
- device authentication
- Jamming detection
- The siren detects jamming and alarms about it.
- Communication loss detection
- after 36 s Detection time depends on the Jeweller or Jeweller/Fibra settings.
Power supply
- Battery
- 8 × CR123A 3 V⎓ lithium battery Pre-installed.
- Type
- Type C.
- Calculated battery life
- up to 10 years in standby mode up to 4.2 years with one 90-second alarm per day
- Operating voltage range
- 3.65−6.2 V⎓
- Nominal operating voltage
- 3 V⎓ in standby mode 6 V⎓ when the siren sounds
- Quiescent current consumption at nominal voltage
- 84 µA
- Maximum current consumption at nominal voltage
- 640 mA When the siren sounds at the Very Loud volume level.
- Peak current consumption at nominal voltage
- 960 mА When the siren sounds at the Very Loud volume level.
- Average current consumption at nominal voltage
- 125 mA When the siren sounds at the default volume level. Regardless of the arming mode.
- Full battery capacity
- 12,800 mAh Capacity of each battery is 1600 mAh.
- Low battery voltage
- 4.69 V⎓
- End-of-life battery voltage
- 4 V⎓
- Manufacturer
- Huiderui
- Electric shock protection class
- Class III
Optional power supply
- Remote power supply’s operating voltage
- 9.6−14.4 V⎓
- Remote power supply’s nominal voltage
- 12 V⎓
Enclosure
- Dimensions
- 210 × 210 × 71 mm
- Weight of the white device
- 1,146 g
- Weight of the black device
- 1,124 g
- Operating temperature range
- from −25 °C to +60 °C
- Operating humidity
- up to 95% with no condensation
- Protection class
- IP54, IK08
What’s in the box
- Superior StreetSiren Plus G3 Jeweller
- SmartBracket mounting panel
- Installation kit
- Quick start guide
For your installation
- Selected as part of an installer-reviewed security or automation project.
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- The siren is designed for indoor and outdoor use. Recommended installation height is 2.5 m or higher.