MAKE IT YOURS
Superior HomeSiren.
Wireless siren with an LED connector
Standards and certifications
Superior HomeSiren Jeweller · HS.S.J. Manufacturer-listed marks; regional and installation conditions apply.
Hear the alarm. Understand the everyday signals.
Superior HomeSiren Jeweller combines a compact indoor siren with configurable LED and sound feedback. It can warn of an alarm, guide entry and exit, and signal an opening while the system is disarmed. Replaceable batteries and wireless communication allow installation without a power cable.
Key features. At a glance.
Adjustable volume for alarms and notifications
Adjustable duration of alarms1
Built-in LED indicator
Possibility to connect a third-party LED indicator
Chime feature2
Holding screw
for reliable fastening and protection from quick dismantling
After-alarm indication
Up to 2,000 m3
of wireless communication range with an Ajax hub or range extender
Power adjustment
Two colors
Indication of security mode change and delay when entering or leaving
Informative push notifications
Up to 5 years
of operation on enhanced batteries
Remote control and configuration
Hassle-free installation
- 1From 3 seconds to 3 minutes.
- 2Requires additional installation of an opening detector.
- 3In an open space. Range is measured in open space; walls and installation conditions reduce it.
Ajax product information ↗ · Superior HomeSiren Jeweller specifications ↗
Protection in real places.
Superior HomeSiren Jeweller
Every detail has a purpose.
Explore the function, installation and system requirements of Superior HomeSiren Jeweller.
Loading detail…
Know what the system is telling you.
Draw attention to an alarm
Choose which system devices should activate the siren and configure its response to tamper and panic events. Sound and light can alert people nearby; notifications and any monitoring response depend on the connected system and service settings.
A gentle signal for everyday arrivals.
Chime while the system is disarmed
A short notification can announce an opening detector being triggered. Configure the siren and the relevant device, then test the event and volume. This signal informs people of an arrival without treating it as an intrusion alarm.
Set the alarm and its visual feedback.
Set the sound for the site
Choose an alarm volume within 81–105 dB at 1 m and a duration from 3 seconds to 3 minutes. Notification beeps can be adjusted separately. Test audibility in the actual space rather than relying only on the maximum figure.
Keep the warning device connected.
Jeweller
Two-way radio carries alarms, commands and status over an open-space range of up to 2,000 m. Walls, metal and interference reduce usable range; test reception before final installation.
Requires a compatible hub with OS Malevich 2.16 or later. Check the exact radio region and current compatibility list.
Reach a siren beyond the direct radio path.
Use a compatible radio range extender
A compatible ReX or ReX 2 can connect a siren where direct hub reception is insufficient. Check the hub’s capacity and choose both mounting positions through signal tests.
A range extender needs its own suitable power and communication arrangement. The open-space specification is not a guaranteed distance inside a building.
Wireless operation on replaceable batteries.
Two CR123A cells, up to 5 years
Actual service life depends on sound use, indication, polling, temperature and radio conditions. Check low-battery reporting and follow the manual when replacing the cells.
Protection that also watches itself.
Monitor the enclosure and mounting
Tamper protection reports interference with the mounting. Fit the required fasteners and test the event at the end of installation.
Supervise the connection
Regular exchanges allow the hub to detect a missing device and report the affected siren and room. Connection-loss timing depends on the configured polling interval and missed-packet threshold.
Install within the specified conditions.
Indoor placement
Use indoors from −10 to +40 °C and up to 75% humidity. The enclosure is rated IP50 and IK06.
Place it well. Test the complete response.
Check audibility and visibility
Choose a position where the alarm can be heard and the indication can be seen. Use the exact mounting instructions and permanent fixings, secure SmartBracket, and test removal protection. Avoid a location where the sound could trigger a nearby glass-break detector.
Find the right siren.
Compare indoor and outdoor sirens across Baseline, Superior and Fibra. See how sound, light, power and everyday notifications fit the place you want to protect.
Compare sirens →Every detail, in one place.
Communication
- Jeweller communication technology
- Proprietary wireless communication technology to transmit commands, alarms, and events. Key features: Two-way communication. Advanced sabotage protection. Block encryption featuring a dynamic key. Instant notifications. Remote configuration in the Ajax apps.
- Frequency bands
- 868.0–868.6 MHz
- Maximum effective radiated power (ERP)
- up to 25 mW Automatic power control to reduce power consumption and noise interference.
- Radio signal modulation
- GFSK
- Radio signal range
- up to 2,000 m Between siren and control panel (or range extender) in an open space.
- Encrypted communication
- All the data stored and transmitted are protected by block encryption with a dynamic key.
- Frequency hopping
- Radio communication uses frequency hopping to prevent interception and jamming.
Key features
- Alarm type
- acoustic and LED Buzzer and LED.
- Type of warning device
- type W Internal, self-powered.
- Alarm volume
- from 81 to 105 dB at a distance of 1 m Adjusted by PRO or user with admin rights in the Ajax app. 94 dB at a distance of 1 m Default settings.
- Alarm duration
- from 3 s to 3 min Adjusted by PRO or user with admin rights in the Ajax app.
- Siren sound frequency
- 3.4 ± 0.5 kHz
- Ability to connect an additional LED
- 3 V⎓ An additional LED works in parallel with the built-in LED of the siren and fully replicates its indication.
- Events indication
- Alarms. Delays when entering/leaving. Security mode. Security mode changing. After-alarm indication.
- Chime
- The siren makes a special sound to notify that the opening detectors are triggered when the system is disarmed.
Sabotage protection
- Tamper alarm
- Notifications on attempts to detach the siren from the surface or remove it from the mounting panel.
- Holding screw
- to secure the siren on SmartBracket
- Protection against spoofing
- device authentication
- Communication loss detection
- after 36 s Detection time depends on the Jeweller or Jeweller/Fibra settings.
Power supply
- Batteries
- 2 × CR123A 3 V⎓ Lithium battery Pre-installed.
- Type
- Type C.
- Calculated battery life
- up to 5 years
- Siren’s operating voltage range
- 1.9−3.3 V⎓
- Siren’s nominal operating voltage
- 3 V⎓
- Quiescent siren’s current consumption at nominal voltage
- 42 µA
- Peak siren’s current consumption at nominal voltage
- 1.1 A When the siren sounds at the Very Loud volume level.
- Average siren’s current consumption at nominal voltage
- 50 mA When the siren sounds at the default volume level. Regardless of the arming mode.
- Full capacity
- 3,200 mAh
- Low battery voltage
- 2.1 V⎓
- End-of-life battery voltage
- 1.9 V⎓ Device is switched off.
- End-of-life battery capacity
- 366 mAh
- Manufacturer
- Panasonic
Enclosure
- Dimensions
- 75 × 76 × 27 mm
- Weight of the black device
- 92 g
- Weight of the white device
- 94 g
- Operating temperature range
- from −10°C to +40°C
- Operating humidity
- up to 75%
- Protection class
- IP50, IK06
What’s in the box
- Superior HomeSiren Jeweller
- SmartBracket mounting panel with holding screw
- 2 CR123A batteries (pre-installed)
- Connector for LED indicator
- Installation kit
- Quick start guide
For your installation
- Selected as part of an installer-reviewed security or automation project.
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- The siren is designed for indoor use only.; Recommended installation height is 2.5 m and higher.