MAKE IT YOURS
Superior HomeSiren G3.
Wireless siren with advanced sabotage protection and an LED connector
Standards and certifications
Superior HomeSiren G3 Jeweller · HS.G3.J. Manufacturer-listed marks; regional and installation conditions apply.
See Ajax for the certified model and installation conditions.
An indoor warning with enhanced radio protection.
Superior HomeSiren G3 Jeweller combines indoor sound and LED indication with Superior Jeweller communication and local jamming detection. Configure alarms, daily status signals and Chime for the space. Its Grade 3 capability depends on the compatible hub and the complete system configuration.
Key features. At a glance.
- 1The type of indication depends on the specific event. For more information, refer to the user manual.
- 2Battery life in standby mode. Up to 2.5 years with one 90-second alarm per day.
Ajax product information ↗ · Superior HomeSiren G3 Jeweller specifications ↗
Protection in real places.
Know what the system is telling you.
Draw attention to an alarm
Choose which system devices should activate the siren and configure its response to tamper and panic events. Sound and light can alert people nearby; notifications and any monitoring response depend on the connected system and service settings.
A gentle signal for everyday arrivals.
Chime while the system is disarmed
A short notification can announce an opening detector being triggered or a DoorBell button being pressed. Configure the siren and the relevant device, then test the event and volume. This signal informs people of an arrival without treating it as an intrusion alarm.
Set the alarm and its visual feedback.
Set the sound for the site
Choose an alarm volume within 81–105 dB at 1 m and a duration from 3 seconds to 3 minutes. Notification beeps can be adjusted separately. Test audibility in the actual space rather than relying only on the maximum figure.
Keep the warning device connected.
Superior Jeweller
Two-way radio carries alarms, commands and status over an open-space range of up to 3,500 m. The maximum also depends on the hub model. Walls, metal and interference reduce usable range; test reception before final installation.
Requires a compatible hub with OS Malevich 2.35 or later. Check the exact radio region and current compatibility list.
Grade 3 starts with the complete system.
Keep the radio protection consistent
Superior Jeweller provides encrypted communication and enhanced frequency hopping when every connected wireless device supports it. Adding a regular Jeweller device changes the system’s radio behaviour and limits the system to Grade 2.
Grade 3 is not guaranteed by buying one G3 device. An accredited Ajax partner must check the hub, every connected device, radio settings, installation and monitoring requirements together. Check the enhanced-hopping status in the app.
Plan for real alarm use.
Two CR123A cells
Calculated life is up to 4 years in standby or up to 2.5 years with one 90-second alarm per day. Radio conditions, settings and temperature affect the result. Keep low-battery notifications enabled and arrange replacement in time.
Protection that also watches itself.
Monitor the enclosure and mounting
Tamper protection reports interference with the mounting. Fit the required fasteners and test the event at the end of installation.
Supervise the connection
Regular exchanges allow the hub to detect a missing device and report the affected siren and room. Connection-loss timing depends on the configured polling interval and missed-packet threshold.
Detect sustained radio interference
The siren analyses potential jamming and can activate an audible alarm when it is confirmed. Configure Radio interference detection and verify the notification route. Short environmental disturbances are assessed separately from sustained interference.
Install within the specified conditions.
Indoor placement
Use indoors from −10 to +40 °C and up to 75% humidity. The enclosure is rated IP30 and IK07.
Place it well. Test the complete response.
Check audibility and visibility
Choose a position where the alarm can be heard and the indication can be seen. Use the exact mounting instructions and permanent fixings, secure SmartBracket, and test removal protection. Avoid a location where the sound could trigger a nearby glass-break detector.
Find the right siren.
Compare indoor and outdoor sirens across Baseline, Superior and Fibra. See how sound, light, power and everyday notifications fit the place you want to protect.
Compare sirens →Every detail, in one place.
Communication
- Superior Jeweller data transfer protocol
- Two-way encrypted radio for commands, alarms and status. Enhanced protection and Grade 3 operation depend on the compatible hub and complete system configuration.
- Frequency bands
- 865.0–868.0 MHz 868.0–868.6 MHz 868.7–869.2 MHz 869.4–869.65 MHz
- Maximum effective radiated power (ERP)
- up to 25 mW Automatic power control to reduce power consumption and radio interference.
- Radio signal modulation
- GFSK
- Radio communication range
- up to 3,500 m Between the device and a hub (or a range extender) in open space. The maximum range depends on the hub model.
- Encrypted communication
- All stored and transmitted data is protected with advanced encryption, ensuring both confidentiality and integrity.
- Frequency hopping
- Full frequency hopping requires all system devices to use Superior Jeweller. With a regular Jeweller device present, the system is limited to Grade 2 and full frequency hopping is disabled.
Key features
- Alarm type
- acoustic and visual Buzzer and LED.
- Type of warning device
- type W Internal, self-powered.
- Alarm volume
- from 81 to 105 dB at a distance of 1 m Adjusted by a PRO or a user with admin rights in an Ajax app. 94 dB at a distance of 1 m Default settings.
- Alarm duration
- from 3 s to 3 min Adjusted by a PRO or a user with admin rights in an Ajax app.
- Siren sound frequency
- 3.4 ± 0.5 kHz
- Ability to connect an additional LED
- 3 V⎓ An additional LED works in parallel with the built-in LED of the siren and fully mirrors its indication.
- Event indication
- Alarms. Entry/exit delays. Security mode state. Security mode change. After-alarm indication.
- Chime
- The siren emits a special sound to indicate the following events: opening detectors are triggered when the system is disarmed; the doorbell button is pressed.
Sabotage protection
- Tamper alarm
- The system sends notifications about attempts to detach the siren from the surface or remove it from the mounting panel.
- Holding screw
- Secures the device on SmartBracket.
- Protection against spoofing
- Ensures device authentication when it communicates with a hub.
- Jamming detection
- The siren detects jamming and then sounds an alarm.
- Communication loss detection
- if there is no signal for 36 seconds or more Detection time depends on the Jeweller or Jeweller/Fibra settings.
Power supply
- Batteries
- 2 × CR123A 3 V⎓ lithium battery Pre-installed.
- Type
- type C
- Calculated battery life
- up to 4 years in standby mode up to 2.5 years with one 90-second alarm per day
- Operating voltage range
- 1.9−3.3 V⎓
- Nominal operating voltage
- 3 V⎓
- Quiescent current consumption at nominal voltage
- 67 µA — jamming detection is enabled 53 µA — jamming detection is disabled
- Peak current consumption at nominal voltage
- 1.2 A When the siren sounds at the Very loud volume level.
- Average current consumption at nominal voltage
- 55 mA When the siren sounds at the default volume level. Regardless of the security mode.
- Full battery capacity
- 3,200 mAh
- Low battery voltage
- 2.1 V⎓
- End-of-life battery voltage
- 1.9 V⎓ The device switches off.
- End-of-life battery capacity
- 366 mAh
- Manufacturer
- Panasonic
Enclosure
- Dimensions
- 75 × 76 × 27 mm
- Weight of the black device
- 92 g
- Weight of the white device
- 94 g
- Operating temperature range
- from −10 °C to +40 °C
- Operating humidity
- up to 75%
- Protection class
- IP30, IK07
What’s in the box
- Superior HomeSiren G3 Jeweller
- SmartBracket mounting panel
- 2 × CR123A battery (pre-installed)
- Connector for LED indicator
- Installation kit
- Quick start guide
For your installation
- Selected as part of an installer-reviewed security or automation project.
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- The siren is designed for indoor use only. Recommended installation height is 2.5 m or higher.
Product documents.
Find the right protection.
Superior HomeSiren Jeweller
Check its sound, communication and power requirements.
Superior StreetSiren Plus G3 Jeweller
Check its sound, communication and power requirements.