MAKE IT YOURS
StarterKit.
The starter kit for the Ajax security system. The kit consists of the hub, motion detector, opening detector and key fob with panic button.
Standards and certifications
StarterKit · KIT.Y.J. Manufacturer-listed marks; regional and installation conditions apply.
A first step into connected protection.
StarterKit brings together the original Hub (2G), MotionProtect, DoorProtect and SpaceControl. Detect movement in one indoor area and opening at one door or window, with control in the Ajax app or from the remote. This is a starting set for a planned system: the original hub has Ethernet and one 2G SIM slot, and does not support MotionCam photo detectors.
Key features. At a glance.
4
devices included in the box
Indoor motion detection
The included MotionProtect detects movement in the protected area.
One protected opening
Configure DoorProtect for a door or window, including protection while you are at home.
App and remote control
Use the Ajax app or the included SpaceControl.
Ethernet and cellular
2G · 1 SIM slot. Configure backup connections; SIM service is separate.
Up to 100
devices in the system
Add compatible protection as your property’s needs grow. Additional equipment is separate.
Four devices. One connected beginning.
These exact devices are included in the box. Start with one indoor area and one opening, then build out protection around your property.
1 included
Hub (2G)
System control
Explore Hub (2G)1 included
MotionProtect
Indoor motion detection
Explore MotionProtect1 included
DoorProtect
One door or window
Explore DoorProtect1 included
SpaceControl
Arm, disarm & panic
Explore SpaceControlThe hub brings it together.
Hub (2G)
Connect through Ethernet, one SIM slot for 2G. Configure backup connections so the system has another route when the main one is unavailable.
Up to 100 devices
The included detector, opening sensor and remote occupy three device slots. The hub does not count itself. Capacity is subject to device limits and configured polling settings.
Access and automation
Up to 50 users, 9 security groups and 5 automation scenarios. Set permissions for each person. Automation needs compatible additional devices; the box includes no automation actuator.
The hub needs mains power and a working internet connection. Cellular backup needs a suitable SIM and service. Installation, monitoring and service charges are separate. Check local availability of the kit’s cellular network before ordering.
Original Hub (2G). It does not support MotionCam photo detectors. Confirm regional availability and local 2G service.
Four devices working as one system.
From detection to a clear event
MotionProtect monitors movement in an indoor area; DoorProtect reports opening at one door or window. The detectors report to Hub (2G), which coordinates the system and forwards configured events to users and, when contracted, a monitoring company. SpaceControl provides local security-mode control.
The box has no siren, keypad or automation actuator. Add them only where the property design calls for them. One starter set does not cover every room and entrance.
Know what is included before you expand.
Photo verification and this kit
Hub (2G) does not support MotionCam or Wings photo transmission. Adding a MotionCam alone cannot enable alarm photos on this hub. Choose a compatible photo-capable hub or a different kit if visual verification is part of your plan.
Control that fits your day.
App, remote and individual permissions
Use the Ajax app or included SpaceControl to arm or disarm. Give users the permissions and group access they need. Night mode can keep selected perimeter detectors armed while you move through the rest of the property.
Configure entry and exit delays for the route you use. SpaceControl’s panic button sends an alarm event when enabled; response arrangements must be agreed separately.
Keep track of the system itself.
Supervised radio and connection status
Encrypted, two-way Jeweller communication links the peripherals to the hub. Regular polling checks device availability; the app reports a missing device or a fault. Connection-loss timing depends on polling and missed-packet settings.
Test signal strength at every installation position. Walls, floors and interference affect range; an open-space maximum is not a coverage promise for a building.
Power, tamper and battery alerts
The hub has a rechargeable backup battery, and the wireless peripherals use batteries. The system reports relevant low-battery, power and tamper events so maintenance can be arranged.
Backup duration depends on the hub, battery condition and operating mode. Routers and other network equipment may need their own backup power; the hub battery does not power them.
A planned position. A secure mounting.
Install MotionProtect on SmartBracket
Check radio strength and the detection zone before fixing the mounting panel. Follow the supplied detector’s installation height, orientation and clearance requirements. Secure the detector and test the tamper response after mounting.
Set up, test and hand over.
Connect the right devices
Create the system in the Ajax app, connect the hub and add each included device using its QR code. Give devices clear names and assign rooms so an event identifies the right location.
Check protection before relying on it
Test radio strength, motion detection and the protected opening. Check mounting, entry and exit delays, notifications, remote control and every configured backup connection. For a kit with MotionCam, verify that the alarm photo sequence arrives.
If professional monitoring is required, agree the service and test alarm delivery with the monitoring company. Monitoring, dispatch and installation are separate services; the kit alone does not arrange a response.
A starting point. With room to grow.
These are optional additions, chosen for your property and checked against the exact hub. They are separate from the four devices in the box.
More rooms and entrances
Add movement and opening detectors to extend coverage. Sirens provide an audible warning; a keypad adds convenient control at the entrance.
Fire and water protection
Add compatible FireProtect and LeaksProtect detectors for further kinds of alerts in the same Ajax app. Placement and the exact detector model are selected for your property.
Convenient control and automation
Add compatible keypads and automation devices for everyday routines. Gate, light and other scenarios need the appropriate control device and installation.
Further rooms or a separate building
A signal test may show a need for a range extender or another hub. Add that equipment when the actual distance and building materials are known.
Video cameras can share the Ajax app too. They use their own network, power and recording arrangements; video is not unlocked by a particular alarm hub.
Build a system for your propertyFind the right StarterKit.
Compare the exact equipment in the box, alarm photos and how each system can grow. Start with your property, then choose the kit and the extra devices it needs.
Compare StarterKits →Every detail, in one place.
Components
- 1
- Hub
- 2
- MotionProtect
- 3
- DoorProtect
- 4
- SpaceControl
What’s in the box
- Hub
- MotionProtect
- DoorProtect
- SpaceControl
For your installation
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- Check individual component specifications for installation, power and operating limits.