Reyee · Network
RG-EST310 V2
5 GHz wireless bridge · two-device kit
Connect a house and a separate building without a network cable between them. A factory-paired kit with two bridge units and their power adapters.
€129.99
Per kit, including VAT · Latvia
Choose the quantity for your project. Exact connections are checked separately.
Connect two buildings.
Place one unit at each end, facing the other across a clear path. The bridge carries network data; devices in the remote building still need their own power.
Key features. At a glance.
2
bridge units in one kit
5 GHz
directional wireless link
100 Mbps
Ethernet port on each unit
Your network and power
The right fit for your setup.
Check the connections, power and installation location.
- A clear line of sight is needed. The manufacturer's range is up to 1 km; actual throughput depends on distance, interference and installation.
- Each unit has a 100 Mbps Ethernet port. The 867 Mbps wireless link rate is not the usable network throughput.
- Use the included 24 V passive PoE adapters. Do not connect an ordinary 48 V PoE source. The bridge does not power a camera or provide internet by itself.
Every detail, in one place.
Technical specifications
- Manufacturer part number
- RG-EST310 V2
- Supplier SKU
- 367312121
- Wireless
- 5 GHz · 802.11ac · 2 × 2 MIMO
- Ethernet
- 1 × 10/100 Mbps per unit
- Power input
- 12 V DC / 1 A · 24 V passive PoE
- Protection
- IP54
- Units per kit
- 2
- Dimensions
- 76 × 37 × 147 mm
- Operating temperature
- −30…55 °C
What’s in the box
- Two factory-paired bridge units
- Two 24 V passive PoE adapters
- Two brackets, four pole clamps and four wall screw/anchor sets
- Installation guide