MAKE IT YOURS
MotionProtect Plus.
Wireless IR motion detector with an additional K-band microwave sensor
Standards and certifications
MotionProtect Plus Jeweller · MP.P.J. Manufacturer-listed marks; regional and installation conditions apply.
Confirm movement with two sensors.
MotionProtect Plus Jeweller combines infrared motion detection with a microwave sensor that helps confirm an intrusion. This extra check is useful in rooms where temperature changes or air movement can complicate detection. The two sensing methods work together, with installation position and sensitivity chosen for the actual space.
Key features. At a glance.
Up to 12 m
motion detection distance
Pet immunity
Dual detection technology
microwave sensor verifies alarms detected by the PIR sensor
Software algorithm to prevent false alarms
Temperature compensation
for effective detection in heat and cold
Horizontal viewing angle
Vertical viewing angle
Up to 5 years of operation
with pre-installed battery
Informative push notifications
Up to 1,200 m1
communication range with an Ajax hub or range extender
Tamper alarm
Remote control and configuration
Hassle-free installation
2 colors
of glossy enclosure
Power adjustment
- 1In an open space. Range is measured in open space; walls and installation conditions reduce it.
Ajax product information ↗ · MotionProtect Plus Jeweller specifications ↗
Protection in real places.
MotionProtect Plus Jeweller
Every detail has a purpose.
Explore the function, installation and system requirements of MotionProtect Plus Jeweller.
Loading detail…
How movement becomes an alarm.
PIR detection
An Excelitas PIR sensor detects changes in infrared radiation as a person moves through the area. The lens, mounting position and signal analysis determine reliable coverage.
Motion detection reaches up to 12 m when the detector is correctly installed and configured.
Power for everyday protection.
Replaceable battery power
A preinstalled CR123A battery supports up to five years of wireless operation. The app shows battery status so servicing can be planned.
Battery life depends on settings, use, temperature and signal conditions. Respond to the app’s low-battery notification.
A secure link to your system.
Jeweller communication
Jeweller carries alarms, status and commands between this detector and a compatible hub or range extender. The two-way link uses encryption and device authentication.
The stated range is up to 1,200 m in open space. Walls, metal and the actual installation reduce usable coverage.
Reach the areas your system needs.
Plan around walls and distance
Test the signal where the detector will be installed. If coverage is insufficient, select a compatible range extender; an Ethernet-equipped model provides another route back to the hub.
Range extenders are optional equipment. Check supported models and quantities against the exact hub before planning coverage.
Know that protection is working.
Device state in the app
The detector reports its condition to the hub. Communication, power and tamper information help identify a device that needs attention. Clear device and room names make an alert easier to act on.
Professional alarm monitoring is a separate service. Notification and connection-loss timing depend on system settings and connectivity.
Protection that also watches itself.
Removal alerts
The tamper reports attempts to remove the detector from its mounting panel. Secure the mounting arrangement and check that the event reaches the intended users.
Authenticated communication
The hub checks the detector’s identity during communication. Encryption protects the exchanged data, while authentication helps reject a device attempting to impersonate it.
Installed for your actual space.
Connect
Scan the device QR code to add it to a compatible hub. Assign a clear name and the room or area where it will operate.
Find the right motion detector.
Compare indoor, outdoor and curtain detectors across Baseline and Superior. See what changes for the place you protect, alarm photos, animals and installation.
Compare motion detectors →Every detail, in one place.
Communication
- Jeweller communication technology
- Two-way system communication for the functions specified for this model.
- Radio communication range
- up to 1,200 m Between the device and a hub (or a range extender) in an open space.
- Encrypted communication
- Encrypted device communication.
- Frequency hopping
- To prevent radio interference and jamming.
Detection
- Sensitive element
- PIR sensor microwave sensor K-band microwave sensor to prevent false alarms caused by thermal interference.; Operation frequency: 24 GHz.
- Motion detection distance
- up to 12 m When installed at the height of 2.4 m.
- Motion detection angle
- horizontal: 88.5°
- Motion detection speed
- from 0.3 to 2 m/s The direction of the detector lens should be perpendicular to an alleged intrusion path into the facility.
- Sensitivity
- 3 levels Adjusted by a PRO or a user with admin rights in the Ajax app.
- Pet immunity
- weight: up to 20 kg; height: up to 50 cm
- False alarm prevention
- SmartDetect Software algorithm.
Sabotage protection
- Tamper alarm
- Notifications on attempts to detach the detector from the surface or remove it from the mounting panel.
- Protection against spoofing
- device authentication
- Communication loss detection
- after 36 s Detection time depends on the Jeweller or Jeweller/Fibra settings.
Power supply
- Battery
- 1 × CR123A Pre-installed.
- Detector’s operating voltage range
- 2.1−3.3 V⎓
- Full battery capacity
- 1,600 mAh
- Calculated battery life
- up to 5 years
Enclosure
- Dimensions
- 110 × 65 × 50 mm
- Weight
- 96 g
- Operating temperature range
- from −10 °C to +40 °C
- Operating humidity
- up to 75%
- Protection class
- IP50
What’s in the box
- MotionProtect Plus Jeweller
- SmartBracket mounting panel
- CR123A battery (pre-installed)
- Installation kit
- Quick start guide
For your installation
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- It is recommended to install the detector at a height of 2.4 m.
- The device is designed for indoor use only.
Find the right protection.
MotionProtect Jeweller
Explore the PIR-only model and compare it with your room conditions.
MotionCam HDR (PhOD) Jeweller
Explore the photo-verification detector when visual alarm context is a priority.