MAKE IT YOURS
MotionProtect U.
Wireless PIR motion detector
Standards and certifications
MotionProtect U Jeweller · MP.S.J-000-EU. Manufacturer-listed marks; regional and installation conditions apply.
Room protection with a clear purpose.
MotionProtect U Jeweller detects movement across an indoor area using a PIR sensor, a shaped lens and SmartDetect analysis. Configure sensitivity, check the protected zone and monitor the detector through the Ajax app. Correct placement is central to reliable detection and the intended pet immunity.
Key features. At a glance.
Up to 12 m
motion detection distance
Pet immunity1
Horizontal viewing angle
Vertical viewing angle
Three sensitivity levels
High
Normal
Low
Tamper alarm
software algorithm to prevent false alarms
Temperature compensation
for effective detection in heat and cold
Up to 5 years of autonomous operation
on the pre-installed battery
Informative push notifications
Up to 1,700 m2
of radio communication with an Ajax hub or range extender
Power adjustment
2 colours
of matte enclosure
Holding screw
to secure the detector on a mounting panel
Remote control and configuration
Hassle-free installation
- 1For PIR room detectors, mount at 2.4 m and configure correctly. Test the actual surroundings.
- 2In an open space. Range is measured in open space; walls and installation conditions reduce it.
Ajax product information ↗ · MotionProtect U Jeweller specifications ↗
Protection in real places.
MotionProtect U Jeweller
Every detail has a purpose.
Explore the function, installation and system requirements of MotionProtect U Jeweller.
Loading detail…
Protect the room’s likely entry path.
Motion detection up to 12 m
The PIR sensor responds to a moving thermal pattern across the protected area. A Fresnel lens shapes that view, while the app offers three sensitivity levels.
Mount indoors at 2.4 m; horizontal detection angle is 88.5°. Place the likely intrusion path across the sensor’s view and test the actual room.
Separate movement from thermal interference.
SmartDetect analysis
Software examines the size, speed and intensity of the thermal pattern before deciding whether to raise an alarm.
Make pet immunity part of the installation.
Up to 20 kg and 50 cm tall
Correct installation and configuration can prevent normal movement of pets within these limits from causing an alarm.
Mount at 2.4 m. A pet climbing furniture or moving close to the lens may enter a different part of the detection pattern. Test with the actual surroundings.
Power you can keep track of.
Replaceable batteries
One preinstalled CR123A battery provides up to five years under the stated conditions. Battery status is available in the same Ajax app.
Indoor use only: −10°C to +40°C, IP50 and IK04. Actual battery life depends on use, temperature, polling settings and signal quality.
A secure link to your system.
Jeweller communication
Encrypted two-way communication carries commands, alarms and device status between the device and its compatible Ajax hub or assigned range extender.
Up to 1,700 m in open space. Walls, metal and other obstacles reduce usable coverage. Check signal strength at the installation position and use equipment for the same radio-frequency region.
Reach rooms beyond the direct radio link.
Plan the complete communication path
A compatible assigned range extender can connect a detector where the direct hub link is weak. Test the detector-to-extender path and the extender-to-hub path at their installed positions.
A range extender increases coverage, not the hub’s total device capacity. Ethernet on a supported extender is its connection to the hub; the detector itself stays wireless.
Protection that also watches itself.
Removal alerts
The tamper reports removal from the mounting panel. Secure the panel’s tamper fixing point and the holding screw, then test the removal event.
Connection and device status
Regular exchanges let the hub monitor the detector and report missing communication or a fault. Named events identify the device and room.
Connection-loss detection depends on the polling settings. Notifications require the configured system communication paths.
Authenticated communication
The hub authenticates the device during communication. Encryption protects exchanged commands and events against interception and spoofing.
Set up for the way the site works.
Connect
Scan the device QR code in the Ajax app, then assign a recognisable name and room. Check compatibility with the hub and any range extender before installation.
Find the right motion detector.
Compare indoor, outdoor and curtain detectors across Baseline and Superior. See what changes for the place you protect, alarm photos, animals and installation.
Compare motion detectors →Every detail, in one place.
Communication
- Jeweller communication technology
- Two-way system communication for the functions specified for this model.
- Radio communication range
- up to 1,700 m Between the device and a hub (or a range extender) in an open space.
- Encrypted communication
- Encrypted device communication.
- Frequency hopping
- To prevent radio interference and jamming.
Detection
- Sensitive element
- 1 × PIR sensor
- Motion detection distance
- up to 12 m When installed at a height of 2.4 m.
- Motion detection angle
- horizontal: 88.5°
- Motion detection speed
- from 0.3 to 2.0 m/s The direction of the detector lens should be perpendicular to an alleged intrusion path into the facility.
- Sensitivity
- 3 levels Adjusted by a PRO or a user with admin rights in Ajax apps.
- Pet immunity
- weight: up to 20 kg; height: up to 50 cm
- False alarm prevention
- SmartDetect Software algorithm.
Sabotage protection
- Tamper alarm
- Notifications on attempts to detach the detector from the surface or remove it from the mounting panel.
- Holding screw
- to secure the detector on SmartBracket
- Protection against spoofing
- device authentication
- Communication loss detection
- after 36 s Detection time depends on the Jeweller/Fibra settings.
Power supply
- Battery
- 1 × CR123A Pre-installed.
- Calculated battery life
- up to 5 years
- Operating voltage range
- 2.1−3.3 V⎓
- Full battery capacity
- 1,600 mAh
Enclosure
- Dimensions
- 110 × 65 × 50 mm
- Weight of the white device
- 96 g
- Weight of the black device
- 88 g
- Operating temperature range
- from −10 °C to +40 °C
- Operating humidity
- up to 75%
- Protection class
- IP50, IK04
What’s in the box
- MotionProtect U Jeweller
- SmartBracket mounting panel with holding screw
- CR123A battery (pre-installed)
- Installation kit
- Quick start guide
For your installation
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- It is recommended to install the detector at a height of 2.4 m.
- The device is designed for indoor use only.
Find the right protection.
MotionProtect Plus U Jeweller
Choose PIR-only detection or add microwave verification for a difficult thermal environment.
MotionCam U (PhOD) Jeweller
A camera-equipped detector can show what triggered movement.