MAKE IT YOURS
MotionCam Outdoor HighMount (PhOD).
Wireless PIR motion detector with extended photo verification possibilities. For outdoor installation at a height of 2–4 m.
Standards and certifications
MotionCam Outdoor HighMount (PhOD) Jeweller · MC.OHMP.J. Manufacturer-listed marks; regional and installation conditions apply.
Watch the wider approach from above.
MotionCam Outdoor HighMount (PhOD) Jeweller combines a wide outdoor detection area with HDR photo verification from a 2–4 m mounting position. PIR and microwave sensing verify motion, while anti-masking and a magnetometer supervise the detector’s view and position. Photo triggers and permissions are configured within the Ajax system.
Key features. At a glance.
2–4 m1
installation height
Swivel mount
Up to 15 m
movement detection distance
90° horizontal viewing angle
90° vertical viewing angle
Dual motion detection technology
to trigger the device only when both sensors detect movement
Software algorithm to prevent false alarms
Temperature compensation
for effective detection in heat and cold
Several types of photo verification
Anti-masking system
Magnetometer
to monitor the surrounding magnetic field
HDR technology for clear photos in any condition
Tamper alarm
to notify of attempts to dismantle the device
Hood
to protect masking sensors from rain and snow
enclosure protection
Over-the-air firmware updates
Up to 1,700 m2
of wireless communication range
Power adjustment
Up to 3 years of operation
on pre-installed batteries
Possibility to connect a 12–24 V⎓
external power supply unit
Regular camera health checks
Informative push notifications
Remote control and configuration
Hassle-free installation
- 1Mount at 2–4 m using the supplied swivel mount. This model has no pet immunity.
- 2In an open space. Range is measured in open space; walls and installation conditions reduce it.
Ajax product information ↗ · MotionCam Outdoor HighMount (PhOD) Jeweller specifications ↗
Protection in real places.
MotionCam Outdoor HighMount (PhOD) Jeweller
Every detail has a purpose.
Explore the function, installation and system requirements of MotionCam Outdoor HighMount (PhOD) Jeweller.
Loading detail…
Cover a wider outdoor approach.
90° horizontal detection
A wide main zone helps protect a yard or approach. PIR and K-band microwave sensing work together to verify movement.
Mount at 2–4 m. Detection reaches up to 15 m, depending on sensitivity and installation. This model has no pet immunity.
Verify motion before raising an alarm.
K-band confirmation
A 24 GHz microwave scan adds movement information to the PIR analysis, helping reject thermal interference.
See what is happening at the site.
When motion raises an alarm
The armed detector takes a series of photos when its motion detection triggers an alarm.
Keep photo access under your control.
Permissions and an event record
Configure who may request and view photos, and when requests are allowed. Requested photos are associated with the initiating user in the event log. Review these permissions with the people using the property.
Photo requests are not a live video stream. Photo-by-alarm access and on-demand access have separate rules; enable only the functions needed for this installation.
Check detail in bright and dark areas.
HDR with infrared illumination
HDR retains detail in contrasting light, while IR illumination supports low-light photos. Choose 320 × 240 or 640 × 480 px resolution.
A series can contain 1–5 images at 320 × 240 or 1–3 at 640 × 480. Specified delivery is up to 9 or 20 seconds respectively under the stated conditions; the real time depends on the full communication path.
Power you can keep track of.
Replaceable batteries
Six preinstalled CR123A batteries provide up to three years under the stated conditions. An optional 12–24 V DC external supply can power the detector while the batteries remain as backup.
Photo activity, signal quality and settings affect operating life. External power is not required for firmware updates.
Protect the detector’s view outdoors.
IP55 enclosure and a protective hood
The housing is specified for −25°C to +60°C. Fit the hood to shield the anti-masking area from rain and snow, and keep the lens and camera clear.
Mount only in an approved orientation. IP55 does not mean protection against immersion or high-pressure washing.
A secure link for events and photos.
Jeweller and Wings
Jeweller carries alarms, status and configuration; Wings carries photo verification. Both use encrypted two-way communication with a compatible Ajax hub or assigned ReX 2.
Up to 1,700 m in open space. Obstacles, radio conditions, resolution and the hub’s internet connection affect delivery. Wings also supports firmware updates on this model.
Reach rooms beyond the direct radio link.
Plan the complete communication path
Use a compatible ReX 2 for both detector events and photo delivery. The original ReX does not carry MotionCam photos. Test the detector-to-extender path and the extender-to-hub path at their installed positions.
A range extender increases coverage, not the hub’s total device capacity. Ethernet on a supported extender is its connection to the hub; the detector itself stays wireless.
Protection that also watches itself.
Anti-masking
The system reports attempts to obstruct the detector’s sensitive area using the masking methods listed in the manual.
Test masking protection after installation. It does not guarantee that every obstruction of the separate camera lens will be detected.
Magnetometer monitoring
After calibration, the magnetometer detects changes to the installed position, including attempts to tilt, shift or detach the detector.
Keep the mount’s magnet in place. Recalibrate when the installation is deliberately changed.
Removal and connection alerts
The tamper reports removal from the panel, while the hub monitors connection and device state.
Connection-loss detection depends on the configured polling settings.
Set up for the way the site works.
Connect
Scan the device QR code in the Ajax app, then assign a recognisable name and room. Check compatibility with the hub and any range extender before installation.
Find the right motion detector.
Compare indoor, outdoor and curtain detectors across Baseline and Superior. See what changes for the place you protect, alarm photos, animals and installation.
Compare motion detectors →Every detail, in one place.
Communication
- Jeweller communication technology
- Two-way system communication for the functions specified for this model.
- Radio communication range
- up to 1,700 m Between the device and a hub (or a range extender) in an open space.
- Encrypted communication
- Encrypted device communication.
- Frequency hopping
- To prevent radio interference and jamming.
- Wings communication technology
- Two-way system communication for the functions specified for this model.
- Radio communication range
- up to 1,700 m Between the device and a hub (or a range extender) in an open space.
- Encrypted communication
- Encrypted device communication.
Detection
- Sensitive elements
- 2 × PIR sensor 1 × K-band microwave sensor Operating frequency: 24 GHz.
- Motion detection distance
- up to 15 m When installed at a height of 2–4 m. Depends on the sensitivity level adjusted in the device settings.
- Motion detection angle
- horizontal: 90°
- Motion detection speed
- from 0.3 to 2.0 m/s The direction of the detector sensors should be perpendicular to an alleged intrusion path into the facility.
- Sensitivity
- 3 levels Adjusted by a PRO or a user with admin rights in Ajax apps.
- False alarm prevention
- SmartDetect Software algorithm.
- Temperature compensation
- Effective movement detection in temperatures from −25 °C to +60 °C.
Photo verification
- Photo by alarm
- The built-in camera is activated if the detector is armed and movement is detected.
- Photo on demand
- A user takes pictures at any time or when the detector is armed (depending on settings). The feature is disabled by default.
- Photo by scenario
- The detector takes pictures automatically when other Ajax detectors are triggered. The feature is not configured by default.
- Photo by schedule
- The detector automatically takes photos at the specified time. The feature is not configured by default.
- Photo by arming/disarming
- The detector automatically takes photos when the security state is changed.
- Adjustable photo resolution
- 640 × 480 px 320 × 240 px (default) Adjusted by a PRO or a user with admin rights in Ajax apps.
- Camera viewing angles
- horizontal: 115° vertical: 84°
Sabotage protection
- Tamper alarm
- Notifications of attempts to remove the detector from the mounting panel.
- Magnetometer
- detects attempts to tilt or shift the detector or detach it from the surface
- Anti-masking system
- detects attempts to block the detector view
- Holding screw
- secures the device on SmartBracket
- Protection against spoofing
- device authentication
- Communication loss detection
- after 36 s Detection time depends on the Jeweller/Fibra settings.
Main power supply
- Battery
- 6 × CR123A Pre-installed.
- Calculated battery life
- up to 3 years
- Detector operating voltage range
- 3.8−6.5 V⎓
- Full battery capacity
- 4,800 mAh
Optional power supply
- External supply operating voltage
- 12−24 V⎓ The batteries serve as a backup when an external power supply is connected.
Enclosure
- Dimensions with the swivel mount
- 234 × 98 × 230 mm
- Dimensions without the swivel mount
- 234 × 98 × 137 mm
- Weight with the swivel mount
- 1,010 g
- Weight without the swivel mount
- 620 g
- Operating temperature range
- from −25 °C to +60 °C
- Operating humidity
- up to 95%
- Protection class
- IP55
What’s in the box
- MotionCam Outdoor HighMount (PhOD) Jeweller
- 6 × CR123A battery (pre-installed)
- SmartBracket mounting panel
- Swivel mount
- Hood
- Installation kit
- Quick start guide
For your installation
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- It is recommended to install the detector at a height of 2–4 m.
- The pet immunity feature is not available for this device.
- The device is designed for outdoor and indoor use.
Find the right protection.
CurtainCam Outdoor HighMount (PhOD) Jeweller
Choose a narrow curtain or wider area coverage at a 2–4 m installation height.
MotionCam Outdoor (PhOD) Jeweller
Compare the different mounting height and pet-immunity conditions of MotionCam Outdoor (PhOD).