MAKE IT YOURS
KeyPad.
Wireless touch keypad is used to arm/disarm an Ajax security system. It is mounted in the room near the entrance door to provide quick access to the keypad.
Standards and certifications
KeyPad Jeweller · KP.Y.J. Manufacturer-listed marks; regional and installation conditions apply.
Simple control at the entrance.
KeyPad Jeweller provides a dedicated place to arm and disarm the alarm system using a code. It is useful near an entrance where people need a clear, familiar way to change the security mode. The keypad works with the Ajax system so everyday access and system status stay connected.
Key features. At a glance.
Code-based access1
Touch keys for arming, disarming and Night Mode
Personal and keypad codes
Identify a user or use a shared device code
Security groups
Manage the assigned area
Up to 992
access codes for people without an account
Duress codes3
A silent alarm while simulating disarming
Configurable function button4
Panic alarm, fire-alarm muting or disabled
Code-guessing protection
Automatic lockout after repeated invalid codes
Security and fault indicators
Visible while the keypad is active
Up to 2 years5
on four replaceable AAA batteries
Up to 1,700 m6
Jeweller communication in open space
Tamper and connection alerts7
Reports removal and communication loss
Indoor SmartBracket installation
Configure and test in the Ajax app
- 1This model has no card, key-fob or smartphone reader.
- 2Hub-dependent. Requires supported OS Malevich 2.13.1 or later; not available with Hub (2G) Jeweller.
- 3Agree the response with the monitoring provider.
- 4One selected function. Fire muting needs a supported interconnected-fire-alarm setup.
- 5Life varies with use, settings, temperature and radio conditions.
- 6Walls, metal and other obstacles reduce actual coverage.
- 7Connection-loss detection depends on polling settings.
Ajax product information ↗ · KeyPad Jeweller specifications ↗
Protection in real places.
A familiar place to manage security.
Arm, disarm and activate Night Mode
Use the touch keys to change the system’s security mode. KeyPad can control the whole system or its assigned security group; the indicators show armed, disarmed, Night Mode and malfunction states when the keypad is active.
This model uses codes. It does not read Pass cards or Tag key fobs and does not authenticate smartphones.
Give each person the right level of access.
Personal codes
A code associated with an Ajax user identifies who changed the security state and follows that user’s permissions.
A keypad code
A shared code identifies the keypad in the event feed. Use personal codes when individual accountability is needed.
Group control
Control an assigned group, or use the documented group-ID sequence with the general code. Arming without a code can be enabled; disarming still requires authorised access.
Access without an Ajax account.
Named codes for visitors and service staff
Create, change or deactivate access codes in the hub settings for people who do not have an Ajax account. Assign a clear name so their events can be identified.
Requires a compatible hub with OS Malevich 2.13.1 or later. Hub (2G) Jeweller does not support these access codes. The hub model determines the available number, up to 99.
A deliberate way to raise an alarm.
A duress code
A configured duress code appears to disarm the system while sending a silent alarm to the monitoring station. Train users in its use and agree the response with the monitoring provider.
Control that is protected against interference.
Protection against code guessing
Enable automatic locking after repeated incorrect codes. An authorised administrator can set the lock period in the app.
Removal and connection alerts
The tamper reports removal from SmartBracket or the mounting surface. Regular hub communication helps reveal a missing keypad; detection time depends on polling settings.
Battery-powered at the entrance.
Four replaceable AAA batteries
The preinstalled batteries provide up to two years of operation under the stated conditions. The app reports low battery, while adjustable backlight and beeper settings let you adapt the keypad to the room.
Operating life depends on use and settings. Indoor use only, from −10°C to +40°C.
A secure link to your system.
Jeweller communication
Jeweller carries commands, alarms and device status between the control and a compatible Ajax hub or assigned range extender. Encrypted communication and device authentication help protect the exchange.
Up to 1,700 m in open space. Walls and metal reduce usable range; check operation at every intended location. Choose equipment for the same radio-frequency region.
Ready for everyday use.
Connect
Add the device by its QR code in the Ajax app, then assign a clear name and room. Check hub compatibility and regional radio frequencies before commissioning.
Find the right control device.
Compare keypads, key fobs and panic buttons across ranges. See how people arm the system, identify themselves, operate a routine or ask for help.
Compare control devices →Every detail, in one place.
Communication
- Jeweller communication technology
- Two-way system communication for the functions specified for this model.
- Radio signal range
- up to 1,700 m Between the keypad and the hub or range extender in an open space.
- Encrypted communication
- Encrypted device communication.
- Frequency hopping
- To prevent radio interference and jamming.
Key features
- Sensor type
- capacitive
- Malfunctions and security mode indication
- When KeyPad is active, it notifies with LED indication of the security mode, problems with detectors, or communication loss with the hub.
- Functional button
- Operates in one of the modes. alarm The system sends an alarm to the central monitoring station and users. It also activates the sirens connected to the system. mute fire alarm Mutes interconnected fire detectors alarms. off The button is disabled.
- Access codes
- up to 200 personal codes One code per each user. The number of personal access codes depends on the hub model. 1 keypad code One code per KeyPad.
- Duress codes
- up to 200 personal codes One code per each user. The number of personal duress codes depends on the hub model. 1 keypad code One code per KeyPad.
- Codes for unregistered people
- up to 99 personal codes For people who are not registered in the system. The number of such codes depends on the hub model.
- Group security management
- Enter the general keypad code and the group ID to manage group security.
Sabotage protection
- Protection against code guessing
- KeyPad locks for 3–180 minutes if an incorrect code is entered more than 3 times in a row within 1 minute. PRO or user with admin rights can adjust the lock time in the Ajax app.
- Tamper alarm
- Notifications on attempts to detach the keypad from the surface or remove it from the mounting panel.
- Protection against spoofing
- device authentication
- Communication loss detection
- after 36 s Depends on the Jeweller or Jeweller/Fibra settings.
Power supply
- Battery
- 4 × AAA Pre-installed.
- Calculated battery life
- up to 2 years
- Keypad’s operating voltage range
- 1.9−3.3 V⎓
- Full battery capacity
- 2,000 mAh
Enclosure
- Dimensions
- 150 × 103 × 14 mm
- Weight
- 197 g
- Operating temperature range
- from -10°C to +40°C
- Operating humidity
- up to 75%
What’s in the box
- KeyPad Jeweller
- SmartBracket mounting panel
- 4 × ААА battery (pre-installed)
- Installation kit
- Quick start guide
For your installation
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- The device is designed for indoor use only.
Find the right protection.
KeyPad Plus Jeweller
KeyPad Plus adds Pass and Tag authentication.
KeyPad TouchScreen Jeweller
Compare on-screen group and automation control with KeyPad TouchScreen.