MAKE IT YOURS
Hub Plus.
Wireless control panel. Connectable via Wi-Fi, Ethernet, and two SIM cards (2G/3G)
Standards and certifications
Hub Plus Jeweller · HB.P.J. Manufacturer-listed marks; regional and installation conditions apply.
More groups. More ways to stay connected.
Hub Plus Jeweller manages a larger wireless system through Ethernet, Wi-Fi and two SIM cards. Its capacity and group controls suit properties with several areas and users. This is a discontinued model retained for existing-system planning and remaining-stock enquiries; it has no Wings support for MotionCam detectors.
Key features. At a glance.
4 connection paths
Ethernet, Wi-Fi and two SIMs; one active cellular modem.
Up to 150 devices
Check the exact device and hub compatibility.
Up to 99 users
25 security groups for access and arming.
Jeweller devices
No Wings or MotionCam support.
Up to 64 scenarios
Supported triggers depend on equipment and settings.
Up to 2,000 m
Jeweller range in open space; the device may limit it.
Up to 5 extenders
Extend coverage, not capacity.
Up to 16 hours
Backup runtime with Ethernet and Wi-Fi disabled.
Tamper alerts
Supervision of the enclosure and communication.
App permissions
User and PRO access to supported controls.
SmartBracket mounting
Indoor installation without opening the enclosure.
Black or white
The same selected finish across your project.
Ajax product information ↗ · Hub Plus Jeweller specifications ↗
Keep another route for the alarm.
Connection paths
Ethernet, Wi-Fi and two micro-SIM slots provide alternate internet paths. The cellular modem supports 2G/3G, not LTE. Use separate providers where practical; Ethernet and Wi-Fi on the same router still share a failure point.
Switching between Ethernet, Wi-Fi and the active SIM is automatic. A change between the two SIM cards can take up to four minutes; two SIMs do not mean two simultaneous cellular modems.
Size the system around the property.
Devices, users and groups
Plan for up to 150 wireless Ajax devices, 99 users and 25 security groups. Groups let authorised users arm selected areas without changing the state of the whole property.
The device total includes supported sirens and range extenders. The exact specification allows up to 10 sirens or keypads with a built-in siren and 5 range extenders. Check individual device compatibility before adding it; the total capacity does not imply support for every Ajax model.
Start with compatible equipment.
Jeweller devices, without MotionCam
This hub communicates with supported Jeweller detectors, controls and automation devices. It has no Wings radio support, so MotionCam photo-verification detectors cannot be added.
The presence of Ajax cameras in the app does not add MotionCam support to the hub. Video uses separate network and storage equipment. Check the exact device and hub in the current manufacturer compatibility table.
Let devices work together.
Up to 64 scenarios. Available triggers depend on the connected devices and firmware. Plan and test the intended action at commissioning.
Reactions you can plan
Use up to 64 scenarios to coordinate supported automation with alarms, schedules, security modes and supported environmental measurements.
Scenarios run on the hub, including when its cloud connection is lost. The chosen automation device and connected load must support the intended action.
A supervised wireless connection.
Jeweller
Encrypted two-way radio carries commands, alarms and events between the hub and compatible devices. Authentication and frequency hopping help protect communication.
Up to 2,000 m in open space, depending on the connected device. Test at the intended location: building materials, interference and the device’s own limit affect the usable range.
Reach the harder parts of the building.
Coverage, within the same system
Connect up to 5 ReX range extenders. Assign supported devices to improve coverage behind obstacles or across floors.
Hub and Hub Plus do not support ReX 2 or photo verification. An extender does not increase the hub’s device capacity, and extenders cannot be chained through one another.
Keep protection running through a power cut.
Mains and backup battery
The hub uses 110–240 V AC mains power and automatically changes to its rechargeable battery when external power fails. The built-in 2 Ah battery is specified for up to 16 hours when Ethernet and Wi-Fi are disabled.
Runtime depends on battery condition, settings and communication activity. Router, camera and network power must be planned separately.
More standby time, with a different connection pattern.
Battery Power Saver
A PRO can enable the supported battery-saving mode for an installation. When external power fails, the hub can enter standby and temporarily disconnect its external communication channels to conserve the backup battery.
In standby the hub is not continuously connected to Ajax Cloud or the monitoring station. Events wake it to communicate. Review the monitoring requirements and wake-up settings before enabling this mode; it is not the same as continuous online operation.
The system also monitors its own state.
Tamper and communication checks
The tamper reports removal from the mounting panel. Regular exchanges check device communication, and the system reports faults, lost links and detected interference according to its settings.
Device polling is configurable from 12 to 300 seconds. Cloud-loss notification timing is also configurable; a quoted 60 seconds is not guaranteed for every setup. A notification requires an available delivery path.
Manage access, with the right permissions.
Ajax apps and OS Malevich
Authorised users and PROs manage the system, review events and configure equipment through Ajax apps. The hub runs OS Malevich and receives supported software updates.
Hub Plus production ended on 1 March 2024. Ajax states that existing units continue to receive support and updates during their product lifecycle. Confirm supply and compatibility for an existing installation; this is not a promise of every future feature.
Ready for a careful handover.
Connect and add
Connect mains power and the planned internet paths, prepare the SIM cards and add the hub by its QR code in the Ajax app. A working Ajax Cloud connection is needed for app configuration and remote management.
Find the right hub.
Choose the control panel for your alarm system. Compare device connections, alarm photos, internet routes and power for the exact hub version.
Compare hubs →Every detail, in one place.
Capacity
- Ajax devices
- up to 150 Specifically, up to 10 sirens or keypads with a built-in siren and 5 range extenders.
- Ajax NVRs
- up to 14
- Ajax cameras
- up to 224 via Ajax NVRs and up to 200 standalone
- Third-party IP cameras
- up to 10 when using RTSP via SDK up to 224 when using ONVIF via Ajax NVRs
- Users
- up to 99 Any number of admin users within the hub limit.; PRO accounts for installers.; PRO accounts for installation and monitoring companies.; Access management for users.
- Automation scenarios
- up to 64 By alarm.; By schedule.; By arming/disarming.; By temperature, humidity, CO2 concentration.; By pressing Button.
- Security groups
- up to 25
Communication
- Jeweller communication technology
- Two-way system communication for the functions specified for this model.
- Radio communication range
- up to 2,000 m Between a hub and connected devices (in an open space). Maximum range depends on the connected device.
- Polling interval
- from 12 to 300 s Adjusted by a PRO or user with admin rights in Ajax apps.
- Encrypted communication
- Encrypted device communication.
- Frequency hopping
- To prevent radio interference and jamming.
Communication channels
- Ethernet
- 1 × 8P8C socket Up to 100 Mbps
- Cellular
- 2 × micro SIM slot
- Cellular bands
- 2G GSM900/DCS1800 (B3/B8) 3G WCDMA 900/2100 (B8/B1)
- Wi-Fi
- 802.11 b/g/n module Up to 600 Mbps
- Automatic switching between communication channels
- Instant switching between Ethernet, Wi-Fi, and SIM.; Instant switching between 3G and 2G networks of one SIM.; Switching between SIMs takes up to 4 minutes.
- Communication channels prioritization
- Communication channels work in parallel to increase the system’s reliability.; Most of the data is transmitted via Ethernet.
- Alarm transmission system categories
- SP2, SP5, DP3
Notifications
- Notification types
- Push notifications; SMS; Calls
- Event types
- Alarms; Malfunctions; Security state change; System events; Non-security alerts; Automation devices Notification types are configured individually for each user.; Notifications can be customized for A–D schemes according to EN 50131 requirements.
Monitoring
- Supported protocols
- SIA DC-09 (SIA-DCS); SurGard (Contact ID); ADEMCO 685; Other proprietary protocols
- Event types
- System alarms and events; Panic button coordinates
Power supply
- Main power supply type
- type A
- Device operating AC voltage range
- 110–240 V~, 50/60 Hz Up to 10 W of mains power consumption.
- Backup power supply
- built-in Li-ion rechargeable battery: 3.7 V⎓, 2 Аh The hub has a 2-pin battery. To replace the hub battery, use the same one.
- Autonomous operation
- up to 16 hours When Ethernet and Wi-Fi are disabled. The Battery Saver feature extends the battery life of the backup rechargeable battery up to 60 hours.
- Alternative power supply
- 12 V⎓ Connected via a 12V PSU for Hub/Hub Plus/ReX alternative power supply unit, which is sold separately.
Sabotage protection
- Tamper alarm
- Notifications on attempts to detach the device from the surface or remove it from the mounting panel.
- Protection against spoofing
- device authentication
- Frequency hopping
- The hub sends notifications about jamming or losing connection with the devices to all users and the security company.
Enclosure
- Dimensions
- 163 × 163 × 36 mm
- Weight
- 350 g
- Operating temperature range
- from −10 °C to +40 °C
- Operating humidity
- up to 75%
- Protection class
- IP20
What’s in the box
- Hub Plus Jeweller
- SmartBracket mounting panel
- Power supply cable
- Ethernet cable
- Installation kit
- SIM card (depends on the sales region)
- Quick start guide
For your installation
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- As of March 1st, 2024, the production of Hub Plus Jeweller has been discontinued.
- All Hub Plus Jeweller devices in use will continue to receive OS Malevich updates during their product lifecycle, while there are no plans to restrict its support for any new device that may be released in the future.
- Ajax Systems remains dedicated to providing support and maintenance services for Hub Plus Jeweller in accordance with our standard warranty conditions, RMA, and support policies.
Find the right protection.
MotionProtect Jeweller
Choose the exact detector and check its hub and firmware requirements.
ReX Jeweller
Review the supported extender. Coverage does not increase system capacity.
Hub 2 Plus Jeweller
Review Hub 2 Plus when planning a new system or a supported upgrade.