MAKE IT YOURS
Curtain Outdoor Mini.
Wireless dual-technology curtain motion detector for outdoor and indoor use
Standards and certifications
Curtain Outdoor Mini Jeweller · CO.M.J. Manufacturer-listed marks; regional and installation conditions apply.
A narrow curtain for compact entry points.
Curtain Outdoor Mini Jeweller combines PIR and K-band microwave sensing in a slim detector for doors, windows and tight passages. Its short curtain-shaped zone, Main and Pet modes, and anti-masking system help protect the approach. Choose the mounting arrangement and sensitivity for the actual entry point.
Key features. At a glance.
Up to 5 m
motion detection distance
Vertical viewing angle: 100°
Horizontal viewing angle: 15°
Dual motion detection technology
to trigger the alarm only when PIR and K-band microwave sensors detect motion
Software algorithm for false alarm prevention
Temperature compensation
for effective motion detection in heat and cold
2 detection modes1
Main and Pet
Multiple sensitivity levels
selectable in the app
Tamper button
Anti-masking system
Accelerometer
Up to 3 years of operation
on pre-installed batteries
protection against dust, water, and harsh temperatures
Over-the-air firmware updates
Up to 1,700 m2
of communication range with an Ajax hub or range extender
Power adjustment
Informative push notifications
Remote control and configuration
Holding screw
for reliable fastening
2 installation options
SmartBracket and the angle mount
Hassle-free installation
- 1Pet mode requires side mounting at 1 m and supports animals up to 70 cm tall. Ceiling mounting is a different arrangement.
- 2In open space. Range is measured in open space; walls and installation conditions reduce it.
Ajax product information ↗ · Curtain Outdoor Mini Jeweller specifications ↗
Protection in real places.
Curtain Outdoor Mini Jeweller
Every detail has a purpose.
Explore the function, installation and system requirements of Curtain Outdoor Mini Jeweller.
Loading detail…
A narrow boundary before the entrance.
Up to 5 m of curtain detection
A 15° horizontal field helps protect windows, doors and compact passages. Choose a mounting arrangement that keeps the approach inside the detection zone.
Test the entire intended approach. Avoid passing traffic, vegetation or other objects that should stay outside the protected area.
Choose the mode for the installation.
Standard detection
Select Main mode for the intended entry area.
Confirm motion with two technologies.
PIR detection
One PIR sensor detects thermal movement in the curtain-shaped zone.
Tune the response to the surroundings.
SmartDetect analysis
The software checks thermal pattern size, movement and intensity before classifying a trigger.
Power you can keep track of.
Replaceable batteries
Two preinstalled CR123A batteries provide up to three years under the specified conditions. The app reports battery status and low-charge warnings.
IP55 enclosure for indoor or outdoor use, −25°C to +60°C. Activity, placement, polling and radio conditions affect battery life.
A secure link, with remote firmware updates.
Jeweller events and Wings updates
Jeweller carries alarms, device status and configuration. Wings carries firmware updates on this model; it does not add a camera or photo verification.
Up to 1,700 m in open space. Requires a compatible hub with OS Malevich 2.34 or later.
Reach rooms beyond the direct radio link.
Plan the complete communication path
A compatible assigned range extender can connect a detector where the direct hub link is weak. Test the detector-to-extender path and the extender-to-hub path at their installed positions.
A range extender increases coverage, not the hub’s total device capacity. Ethernet on a supported extender is its connection to the hub; the detector itself stays wireless.
Keep the view and mounting under supervision.
Anti-masking
The detector reports attempts to block its view, including the masking methods listed in the manual.
Check anti-masking after installation. Keep the lens clear.
Movement alerts
An enabled accelerometer reports attempts to shift the mounted device.
Enable and test it when using the relevant alternate mount.
Removal and communication alerts
The tamper monitors the mounting panel; the hub also checks connection and device state.
Connection-loss detection depends on polling settings.
Set up for the way the site works.
Connect
Scan the device QR code in the Ajax app, then assign a recognisable name and room. Check compatibility with the hub and any range extender before installation.
Find the right motion detector.
Compare indoor, outdoor and curtain detectors across Baseline and Superior. See what changes for the place you protect, alarm photos, animals and installation.
Compare motion detectors →Every detail, in one place.
Communication
- Jeweller communication technology
- Two-way system communication for the functions specified for this model.
- Radio communication range
- up to 1,700 m Between the detector and a hub (or a range extender) in an open space.
- Encrypted communication
- Encrypted device communication.
- Frequency hopping
- To prevent radio interference and jamming.
- Wings communication technology
- Two-way system communication for the functions specified for this model.
- Radio communication range
- up to 1,700 m Between the detector and a hub (or a range extender) in an open space.
- Encrypted communication
- Encrypted device communication.
Detection
- Sensitive elements
- 1 × PIR sensor 1 × K-band microwave sensor K-band microwave sensor to prevent false alarms caused by thermal interference. Operation frequency: 24 GHz.
- Motion detection distance
- up to 5 m When installed at a height of 1 m.
- Motion detection angles
- horizontal: 15° vertical: 100°
- Motion detection speed
- 0.3 to 2.0 m/s The direction of the detector lens should be perpendicular to an alleged intrusion path into the facility.
- Sensitivity
- 5 levels Adjusted by a PRO or a user with admin rights in the Ajax apps.
- Pet immunity
- height: up to 70 cm weight: irrelevant The detector should be installed at a height of 1 meter, and the slider on its enclosure should be set to the Pet position.
- False alarm prevention
- dual motion detection technology SmartDetect Software algorithm.
Sabotage protection
- Tamper alarm
- Notifications on attempts to detach the detector from the surface or remove it from the mounting panel.
- Protection against spoofing
- device authentication
- Anti-masking system
- detects attempts to block the detector view
- Accelerometer
- alarm when the detector is moved Must be activated when the detector is installed on third-party brackets.
- Holding screw
- To secure the detector on SmartBracket.
- Communication loss detection
- after 36 s Detection time depends on Jeweller or Jeweller/Fibra settings.
Power supply
- Battery
- 2 × CR123A Pre-installed.
- Calculated battery life
- up to 3 years
- Detector’s operating voltage range
- 4.1−6.2 V⎓
- Full battery capacity
- 1,600 mAh
Enclosure
- Dimensions of detector
- 145 × 32 × 43 mm
- Dimensions of detector with angle mount
- 145 × 44 × 54 mm
- Weight of detector
- 130 g
- Weight of angle mount
- 20 g
- Operating temperature range
- from −25 °C to +60 °C
- Operating humidity
- up to 95%
- Protection class
- IP55
What’s in the box
- Curtain Outdoor Mini Jeweller
- SmartBracket mounting panel
- 2 × CR123A battery (pre-installed)
- Angle mount
- Installation kit
- Quick start guide
For your installation
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- The device's recommended installation height is up to 5 m on the ceiling and 1 m on the side, depending on the protected area size.
- The device is designed for indoor and outdoor use.
Find the right protection.
Curtain Outdoor Jeweller
Match the detection distance, mounting position and pet mode to the entry point.
CurtainCam Outdoor HighMount (PhOD) Jeweller
Compare a curtain detector with photo verification and 2–4 m mounting.