MAKE IT YOURS
Takeover Module.
Wireless module to integrate third-party wireless devices into an Ajax system. Supports 4 protocols and 3 frequencies.
Bring supported legacy radio devices together.
Takeover Module Jeweller connects listed third-party wireless detectors and key fobs to a compatible Ajax hub. It adds device names, event reporting and supervision in Ajax apps while the existing equipment keeps its original radio protocol. Each module uses one supported protocol at a time; the exact device list, hub software and regional radio version must match the installation.
Key features. At a glance.
Ajax product information ↗ · Takeover Module Jeweller specifications ↗
Protection in real places.
Bring supported wireless devices into Ajax.
Up to eighty devices per module
Keep compatible third-party detectors and key fobs while moving their event reporting into an Ajax system. Add devices by scanning or by entering their IDs, then configure the correct type and subtype.
The limit is up to eighty supported wireless devices, subject to hub capacity. Check the exact model in the manufacturer’s compatibility table; a matching brand or frequency alone is not enough.
Select one protocol for each module.
Four protocol families, three frequencies
The supported families are Qolsys/Interlogix at 319.5 MHz, Honeywell/Resideo/2GIG at 345 MHz, and DSC or AT&T at 433 MHz.
One module operates on one frequency and manufacturer protocol at a time. Several protocols require separate modules. This legacy-device radio link is different from the module’s Jeweller link to the Ajax hub.
Match the Ajax radio version too
The specified hub-side radio band is 905.0–926.5 MHz. The module and hub must use compatible regional radio versions.
Do not assume compatibility with an existing European hub. Requires a supported hub running OS Malevich 2.41 or later; verify the regional version and exact devices before selecting this module.
Keep each device identifiable.
Device, room and event in one place
The module passes supported alarms, restoration, tamper and battery events into Ajax apps. Names, rooms and event types help users and the monitoring company understand what happened.
Available events depend on the third-party model. The legacy radio protocol does not gain new encryption or sensing capabilities merely by being connected to Ajax.
Distinguish the two communication paths.
Module-to-hub supervision
Jeweller exchanges let the hub supervise the module. With three missed packets at a 12-second interval, connection loss can be detected in 36 seconds.
Different polling settings change this time.
Legacy-device supervision
The module can flag a third-party device that has stopped reporting. The current manual offers 4, 8, 12, 18, 24 or 48 hours, with twelve hours as the default.
This is separate from the hub’s Jeweller polling interval. Select the supervision period for the actual third-party protocol and installation.
Stay connected during a power cut.
12 V DC main power
Use the supplied power arrangement rated at 12 V DC, up to 1 A. The built-in battery is charged during normal operation.
Secure the connection from module to hub.
Jeweller events and Wings updates
Jeweller carries events and status over an encrypted, authenticated link. Wings delivers available firmware updates to the integration module.
Up to 2,000 m to a compatible hub or extender in open space. The separate legacy-device link is specified up to 200 m, depending on that device. Walls and interference reduce coverage.
Report interference and physical tampering.
Module removal
The tamper reports attempts to remove the module from SmartBracket or detach it from the wall.
Connected-device sabotage events
Where a supported third-party device reports tampering, the module forwards that event into Ajax.
Only events actually supplied by the connected model can be reported.
Authenticated module communication
The hub authenticates the module and uses encrypted communication for their exchanged data.
Protection of the legacy radio link depends on its original protocol.
Check the complete legacy setup.
Mount and connect power
Secure SmartBracket indoors, route the power cable with its retainer and check the module’s final radio position.
Find the right legacy wireless module.
Check whether Takeover Module can retain your exact legacy wireless detectors and work with the Ajax equipment sold for your country.
Check legacy-device compatibility →Every detail, in one place.
Communication
- Data transfer protocols
- Jeweller To transmit commands, alarms, and events. Wings To transmit large data packets, such as firmware updates.
- Radio communication range
- 2,000 m Between the device and a hub (or range extender) in open space. The maximum range depends on the hub model. Calculate radio communication range at the facility
- Encrypted communication
- Encrypted device communication.
- Frequency hopping
- To prevent radio interference and jamming.
Third-party device connection
- Number of devices
- up to 80 wireless devices
- Radio frequencies
- 319.5 MHz 345 MHz 433 MHz
- Compatibility
- Qolsys, Interlogix Honeywell, Resideo, 2GIG AT&T DSC The complete list of compatible devices is available in the integration module user manual.
- Radio communication range
- up to 200 m Between the third-party device and the integration module in open space. The maximum range depends on the third-party device specifications.
- Device types
- configurable device types with relevant settings Adjusted by a PRO or a user with admin rights in an Ajax app.
Sabotage protection
- Tamper alarm
- The system sends notifications about attempts to detach the integration module from the surface or remove it from the mounting panel.
- Protection against spoofing
- To ensure authentication of the integration module when communicating with a hub.
- Communication loss detection
- after 36 seconds without a signal The detection time depends on Jeweller or Jeweller/Fibra settings.
Power supply
- Main
- 12 V⎓, up to 1 A
- Backup
- built-in rechargeable Li-ion battery 1.8 Аh Up to 24 hours of autonomous operation after loss of the main power supply.
Enclosure
- Dimensions
- 163 × 163 × 36 mm
- Weight
- 490 g
- Operating temperature range
- from −10 °C to +40 °C
- Operating humidity
- up to 75%
- Protection class
- IP20
What’s in the box
- Takeover Module Jeweller
- SmartBracket mounting panel
- Power adapter
- Installation kit
- Quick start guide
For your installation
- Regional product: North America. Confirm suitability for the property country before ordering.
- Selected as part of an installer-reviewed security or automation project.
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- The integration module operates on only one frequency at a time, compatible with a specific manufacturer. Simultaneous operation on multiple frequencies is not supported.
- The integration module supports third-party fire detectors. However, we highly recommend using Ajax fire and life safety devices.
- The integration module is designed for indoor use only.
Find the right protection.
MultiTransmitter Jeweller
Use wired-contact integration for devices connected by signal cable.
DoorProtect U Jeweller
Compare replacing a legacy opening sensor with a directly connected Ajax device.