MAKE IT YOURS

Superior Transmitter Fibra.

Compact module for integrating third-party wired devices over Fibra

MAKE IT YOURS

Compact module for integrating third-party wired devices over Fibra

€36.24Includes 21% VAT

Available from supplier

Superior

Wired security with a compatible Fibra hub. Cable routes, line power and commissioning are designed together.

Compare with another wired integration module →

What to know about Fibra

Wireless is a practical choice when you want to avoid running detector cables. Fibra suits a planned wired installation or suitable existing cabling, after a professional assessment.

An accredited Ajax partner designs and commissions the wired system. We check cable routes, line power and the exact hub with your complete equipment list.

Wireless and Fibra can share a compatible hybrid hub. The selected device and firmware must also be supported. Cabling and installation are quoted separately.

Fibra models use the official Superior product-line name.

Ajax Fibra guidance

Quantity. How many do you need?

Project review

Confirm the compatible Fibra hub, cable topology, termination and complete line power budget.

What else needs checking?

Confirm the installed hub and device software for the functions you need.

Confirm the regional equipment version for LV and local wired-installation requirements.

Selected as part of an installer-reviewed security or automation project.

Required for your setup

A supported control panel — confirm the exact version

Ajax compatibility reference

Saved together in your project. Choose support after your equipment.

Standards and certifications

Superior Transmitter Fibra · TR.Y.F. Manufacturer-listed marks; regional and installation conditions apply.

A small board. A place in the whole system.

Superior Transmitter Fibra fits inside a third-party wired device and connects its contacts to an Ajax hub. The compact board adds named events, remote input settings and supervised Fibra communication. Two signal inputs support an alarm-and-tamper connection or two devices according to the wiring scheme, with a low-current supply for suitable sensors.

Key features. At a glance.

Any connection type

with NO, NC, EOL, 2EOL or 3EOL connection

Instant detection

of wired device connection loss

Installation inside the device enclosure

KeyArm feature

for integrated third-party device

Integration of roller shutter motion detector

Numerous event types

for the integrated device

Intrusion

Panic button

Fire

12 V⎓, 50 mA power supply

for the integrated device

Fast connection to wired devices

by measurement of EOL resistors

Up to 2,000 m¹

range of communication with an Ajax hub or a module that extends the Fibra line

Convenient wire connection

due to accessory 5-pin cable

Remote control and configuration

Informative in-app notifications

nowCriticalAjax

Production: gas detected, Superior Transmitter Fibra in Workshop No. 1

nowCriticalAjax

Office: alarm detected, Superior Transmitter Fibra in Hall No. 1

Chime

for shops, commercial and non-commercial facilities

Low power consumption

Fibra wired communication

Power adjustment

1With U/UTP cat.5 cable. Range depends on cable type, topology and connected load. Check the wired system design with the Fibra power supply calculator before installation.

Ajax product information ↗ · Superior Transmitter Fibra specifications ↗

Fit Ajax integration inside the device.

A 40 × 15 × 12 mm board

Install the module inside the third-party device enclosure, with room for safe cable routing. Its supplied five-pin connection provides signal contacts and a low-current power output.

Two signal inputs, used by the wiring scheme

Z1 and Z2 can connect one device using alarm and tamper contacts (AATT), or two devices according to the manual. Supported connections are NO, NC, EOL, 2EOL and 3EOL. Pulse and bistable operation adapt the input to the connected device.

The specification allows 1–40 kΩ total EOL resistance in 100 Ω increments. Individual resistor settings and the selected wiring scheme must follow the manual; the third-party signal cable is limited to 3 m with 0.22 mm² copper.

Make the message describe the real device.

Name the device, room and event

Select the appropriate event type for each connected device and give it a clear name and room. The configured type determines the notification and monitoring-station event code. A fire or leak event comes from the connected detector; the integration module does not detect that hazard itself.

Let the connected contact manage security.

Versatile security management with KeyArm

KeyArm control

A supported wired control can arm or disarm selected security objects or activate Night Mode. Configure the allowed action and the tamper-related lockout in the app, then test both normal use and tamper behaviour.

KeyArm requires a compatible hub with OS Malevich 2.17 or later. Monitoring a blocking element or bolt lock requires 2.25 or later.

Give an event a clear location and meaning.

Named notifications and connected actions

The app identifies the connected device, event and room. Supported events can trigger configured actions on separate Ajax automation devices. Chime requires a compatible Ajax siren; this board contains neither a siren nor a power relay.

Match the sensor to the available supply.

Up to 50 mA for the wired device

Fibra powers the module over a 7–30 V DC operating range. Its single output supplies 10.5–15 V DC with a maximum total load of 50 mA. Check the sensor’s required voltage and current before choosing this connection.

One supervised wired connection.

Fibra communication

The four-wire connection carries data between the module and a compatible Ajax hub. Two-way communication, encryption with a dynamic key and device authentication help protect this connection. The module remains part of the hub’s system; it is not a standalone control panel.

Use the current compatibility list and supported firmware. The host’s device capacity and the line power budget still apply.

Plan the data path and cable limits.

Up to 2,000 m on the Fibra line

The stated Fibra reach assumes U/UTP cat.5 cable. It is separate from the shorter cable between the integration module and a third-party device. Check topology, signal strength, load and voltage at the final device; a ring has different limits.

Protection that also watches itself.

Instant detection of short circuits or breakage of connected device

Detect changes in the wired connection

Supported EOL connections distinguish specified alarm and fault states, including short circuits or a broken wire. Wire the end-of-line resistors at the device and test each expected condition.

Supervise the connection to the hub

Regular polling lets the hub report a missing module. Event notifications identify the affected device and room so the fault can be investigated.

The 36-second example depends on a 12-second polling interval and three missed packets. Actual fault timing follows the hub settings.

Check the enclosure and tamper circuit

Test the third-party device’s configured tamper circuit. This board sits inside the connected device; protection depends on that enclosure and the chosen alarm/tamper wiring.

Plan additional electrical protection

A compatible LineProtect module can isolate a damaged section and protect devices between that module and the hub. It is a separate product and needs to be positioned as part of the line design.

Connect, configure and test the complete path.

Prepare the installation

An accredited Ajax partner checks compatibility, cable routes, power and tamper connections before fixing the equipment. Isolate the relevant power supplies before wiring. Fit the board inside the third-party enclosure and connect the supplied five-pin cable.

Manufacturer’s product information

Find the right wired integration module.

Keep suitable wired detectors when moving to Ajax. Compare signal inputs, detector power and whether the module can also control equipment.

Compare wired integration →

Every detail, in one place.

Communication

Fibra communication technology: Two-way wired transfer of alarms, events and commands, with device supervision and supported remote configuration.
Line connection: 4-core cable
Connection: to any point of the Fibra line Superior Transmitter Fibra can be installed after a hub, detector, keypad, or siren.
Fibra line length: up to 2,000 m When using the U/UTP cat.5 twisted pair cable.
Encrypted communication: Encrypted communication between the module and the compatible Ajax hub.

Wired devices connection

Supported configurations: roller shutter tamper wired device with 15 event types
Connector pins: 12V — power supply output for a wired detector GND — ground Z1–Z2 — inputs for connecting a wired detector COM — common input for connecting signal contacts of a wired detector Superior Transmitter Fibra has 2 inputs (Z1 and Z2) to connect the wired detector using the AATT (i.e., Alarm Alarm Tamper Tamper) scheme.
Type of connection: NO, NC, EOL, 2EOL, 3EOL With EOL total resistance from 1 kΩ to 40 kΩ with a 100 Ω increment.
Cable length: up to 3 m When using a signal cable with a 0.22 mm² copper conductor.
Operation mode: pulse, bistable
Event types: 15 configurable types: tamper; intrusion; fire; auxiliary; panic; gas; malfunction; leakage; glass break; high temperature; low temperature; masking; duress (opening); vibration (seismic); custom. Configured in Ajax apps by a PRO or administrator.

Sabotage protection

Protection against spoofing: device authentication
Instant line damage detection: Valid for EOL, 2EOL, or 3EOL connections.
Communication loss detection: after 36 s Between the hub and Superior Transmitter Fibra. It can be changed in the hub settings.

Power supply

Module’s operating voltage range: 7–30 V⎓, 185 mW (no load) / 1224 mW (with load) The hub powers the module.
Module’s nominal operating voltage: 24 V⎓
Quiescent module’s current consumption at nominal voltage: 2.1 mA
Maximum module’s current consumption at nominal voltage: 7.7 mA (no load) 51 mA (with load)
Output to the connected wired device: 10.5–15 V⎓, up to 50 mA (total maximum current consumption) One power supply line from Superior Transmitter Fibra.

Board

Dimensions: 40 × 15 × 12 mm
Weight: 6 g
Operating temperature range: from −25 °C to +50 °C
Operating humidity: up to 75%
Electric shock protection: Class II

What’s in the box

Superior Transmitter Fibra
Accessory 5-pin cable
Quick start guide

For your installation

Selected as part of an installer-reviewed security or automation project.
Fibra needs a supported hybrid control panel, checked cable type and topology, termination and a complete power budget. Existing alarm cabling is not automatically suitable.
Superior Transmitter Fibra should be installed inside the wired detector case. The module requires a space with the following minimum dimensions: 40 × 15 × 12 mm

Product documents.

Product informationManufacturer overview for this exact integration module.Technical specificationsInputs, outputs, power, enclosure and operating requirements.Installation and configuration manualExact wiring schemes, compatibility, setup and maintenance.

Your privacy choices