MAKE IT YOURS
Superior StreetSiren Plus.
Wireless siren with advanced sabotage protection and an extended list of compliance certificates. For outdoor and indoor use.
Standards and certifications
Superior StreetSiren Plus Jeweller · SS.S.J. Manufacturer-listed marks; regional and installation conditions apply.
A visible warning with long battery operation.
Superior StreetSiren Plus Jeweller brings sound and LED indication to outdoor or indoor locations. Eight replaceable batteries support wireless installation; optional external power enables additional full-frame status indication. Two tampers and local jamming detection help supervise the siren itself.
Key features. At a glance.
Adjustable signal volume for alarms and other events
Adjustable alarm signal duration1
Selectable sound patterns
NFA2P-compliant
Regular
Bright LED frame
Two tampers
to detect interference with the enclosure or device detachment
Up to 10 years
of operation on enhanced batteries
waterproof and dust-resistant enclosure
Jamming detection
Terminals for connecting an external power supply
Indication of security mode change and delays when entering or leaving
Chime feature2
Power adjustment
Informative push notifications
Up to 1,500 m3
of wireless communication range with an Ajax hub or range extender
Two colors
Remote control and configuration
Hassle-free installation
- 1The alarm duration is adjustable from 3 seconds to 3 minutes.
- 2The Chime feature requires an Ajax opening detector to operate.
- 3In an open space. Range is measured in open space; walls and installation conditions reduce it.
Ajax product information ↗ · Superior StreetSiren Plus Jeweller specifications ↗
Protection in real places.
Superior StreetSiren Plus Jeweller
Every detail has a purpose.
Explore the function, installation and system requirements of Superior StreetSiren Plus Jeweller.
Loading detail…
Know what the system is telling you.
Draw attention to an alarm
Choose which system devices should activate the siren and configure its response to tamper and panic events. Sound and light can alert people nearby; notifications and any monitoring response depend on the connected system and service settings.
A gentle signal for everyday arrivals.
Chime while the system is disarmed
A short notification can announce an opening detector being triggered. Configure the siren and the relevant device, then test the event and volume. This signal informs people of an arrival without treating it as an intrusion alarm.
Set the alarm and its visual feedback.
Set the sound for the site
Choose an alarm volume within 85–107 dB at 1 m and a duration from 3 seconds to 3 minutes. Notification beeps can be adjusted separately. Test audibility in the actual space rather than relying only on the maximum figure. Choose the NFA2P or Regular alarm tone for the intended installation.
Keep the warning device connected.
Jeweller
Two-way radio carries alarms, commands and status over an open-space range of up to 1,500 m. Walls, metal and interference reduce usable range; test reception before final installation.
Requires a compatible hub with OS Malevich 2.26 or later. Check the exact radio region and current compatibility list.
Reach a siren beyond the direct radio path.
Use a compatible radio range extender
A compatible ReX or ReX 2 can connect a siren where direct hub reception is insufficient. Check the hub’s capacity and choose both mounting positions through signal tests.
A range extender needs its own suitable power and communication arrangement. The open-space specification is not a guaranteed distance inside a building.
Long operation on replaceable cells.
Eight CR123A batteries, up to 10 years
Actual life depends on alarm duration, indication, polling, radio conditions and temperature. Follow the exact replacement procedure and investigate low-battery notifications before operation is affected.
Protection that also watches itself.
Supervise the connection
Regular exchanges allow the hub to detect a missing device and report the affected siren and room. Connection-loss timing depends on the configured polling interval and missed-packet threshold.
Detect sustained radio interference
The siren analyses potential jamming and can activate an audible alarm when it is confirmed. Configure Radio interference detection and verify the notification route. Short environmental disturbances are assessed separately from sustained interference.
Monitor the enclosure and mounting
Two tampers report unlocking SmartBracket and detachment from the mounting surface. Fit the required fasteners and test the event at the end of installation.
Install within the specified conditions.
A protected outdoor enclosure
For outdoor or indoor use from −25 to +60 °C and up to 95% humidity without condensation. The enclosure is rated IP54 and IK08. Preserve its protection when routing cables and closing the mounting.
Place it well. Test the complete response.
Check audibility and visibility
Choose a position where the alarm can be heard and the indication can be seen. Use the exact mounting instructions and permanent fixings, secure SmartBracket, and test removal protection. Avoid a location where the sound could trigger a nearby glass-break detector.
Find the right siren.
Compare indoor and outdoor sirens across Baseline, Superior and Fibra. See how sound, light, power and everyday notifications fit the place you want to protect.
Compare sirens →Every detail, in one place.
Communication
- Jeweller communication technology
- Proprietary wireless communication technology to transmit commands, alarms, and events. Key features: Two-way communication. Advanced anti-sabotage. Block encryption featuring a dynamic key. Instant notifications. Remote control and configuration in Ajax apps.
- Frequency bands
- 866.0–866.5 MHz 868.0–868.6 MHz 868.7–869.2 MHz 905.0–926.5 MHz 915.85–926.5 MHz 921.0–922.0 MHz Depends on the sales region.
- Maximum effective radiated power (ERP)
- up to 25 mW Automatic power control to reduce power consumption and noise interference.
- Radio signal modulation
- GFSK
- Radio communication range
- up to 1,500 m Between the siren and a hub (or a range extender) in an open space.
- Encrypted communication
- All stored and transmitted data are protected by block encryption featuring a dynamic key.
- Frequency hopping
- To prevent radio interference and jamming.
Key features
- Alarm type
- acoustic and light A speaker and LED frame.
- Type of warning device
- type X External, self-powered, remote power source with EN 50131-6 compliant power supply.
- Alarm volume
- from 85 to 107 dB at a distance of 1 m Adjusted by a PRO or user with admin rights in the Ajax app.
- Alarm duration
- from 3 s to 3 min Adjusted by a PRO or user with admin rights in the Ajax app.
- Alarm sound
- 2 types NFA2P-compliant and Regular.
- LED indication
- 2 types If the siren has an external power supply, the user can choose between the Corner backlight and Full-frame backlight features. If the siren is powered by a battery, only the Corner backlight feature is available.
- Alarm LED indication in NFA2P-compliant mode
- flashlight color — red flashlight frequency — 1 flash per second
- Siren sound frequency
- 1,400−1,600 Hz in NFA2P-compliant mode 1,400−1,600 Hz in Regular mode
- Device self-test
- Allows you to check whether the battery is sufficiently charged for normal operation.
- Events indication
- Alarms. Delays when entering/leaving. Security mode. Security mode changing. After-alarm indication.
- Chime
- The siren makes a special sound to notify that the opening detectors are triggered when the facility is disarmed.
Sabotage protection
- Tamper alarm
- Notifications on attempts to open the siren’s enclosure, detach the siren from the surface, or remove the siren from the mounting panel.
- Protection against spoofing
- device authentication
- Jamming detection
- The siren detects jamming and alarms about it.
- Communication loss detection
- after 36 s Detection time depends on the Jeweller or Jeweller/Fibra settings.
Power supply
- Batteries
- 8 × CR123A 3 V⎓ lithium battery Pre-installed.
- Type
- Type C.
- Calculated battery life
- up to 10 years
- Siren’s operating voltage range
- 3.65−6.2 V⎓
- Siren’s nominal operating voltage
- 3 V⎓ in standby mode 6 V⎓ when the siren sounds
- Quiescent siren’s current consumption
- 75.6 µA
- Peak siren’s current consumption at nominal voltage
- 690 mА When the siren sounds at the Very loud volume level.
- Average siren’s current consumption at nominal voltage
- 126 mA When the siren sounds at the default volume level. Regardless of the arming mode.
- Full capacity
- 12,800 mAh
- Low battery voltage
- 4.65 V⎓
- End-of-life battery voltage
- 3.65 V⎓
- Manufacturer
- Huiderui
- Electric shock protection class
- Class III
Optional power supply
- Remote power supply’s operating voltage
- 9.6−14.4 V⎓
- Remote power supply’s nominal voltage
- 12 V⎓
- Quiescent siren’s current consumption at nominal voltage
- 8 mA
- Average siren’s current consumption at nominal voltage
- 80 mA When the siren sounds at the default volume level. Regardless of the arming mode.
- Peak siren’s current consumption at nominal voltage
- 420 mA When the siren sounds at the Very Loud volume level.
Enclosure
- Dimensions
- 210 × 210 × 71 mm
- Weight of the white device
- 1,146 g
- Weight of the black device
- 1,124 g
- Operating temperature range
- from −25 °C to +60 °C
- Operating humidity
- up to 95% with no condensation
- Protection class
- IP54, IK08
What’s in the box
- Superior StreetSiren Plus Jeweller
- SmartBracket mounting panel
- Installation kit
- Quick start guide
For your installation
- Selected as part of an installer-reviewed security or automation project.
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- The siren is designed for indoor and outdoor use. Recommended installation height is 2.5 m or higher.