MAKE IT YOURS
Superior KeyPad Plus G3.
Wireless keypad with touch buttons, supporting authentication via Pass, Tag, and codes
Standards and certifications
Superior KeyPad Plus G3 Jeweller · KPP.G3.J. Manufacturer-listed marks; regional and installation conditions apply.
Familiar access. Enhanced radio protection.
Superior KeyPad Plus G3 Jeweller combines code and Pass/Tag control with Superior Jeweller communication. Passcode confirmation can add a second step to contactless access. The keypad supports demanding indoor installations, with its Grade 3 capability depending on the complete system and its configuration.
Key features. At a glance.
Ajax product information ↗ · Superior KeyPad Plus G3 Jeweller specifications ↗
Protection in real places.
Make daily security control straightforward.
Security groups and Night Mode
Arm or disarm the assigned system or groups and activate Night Mode. Personal credentials help identify who changed the state; a shared keypad code suits situations where individual attribution is not required.
Ready during the entry delay
Automatic activation on entry helps a returning user find the keypad and enter a code. Enable the feature and test it with the configured entry route.
Choose how to authenticate.
Pass cards and Tag key fobs
Present an assigned contactless device to manage the permitted security groups. The system can identify the user behind the action.
Add a code to contactless access.
DESFire contactless credentials
Pass cards and Tag key fobs use DESFire authentication and encryption. Assign each access device to its user and revoke it if it is lost. Pass and Tag are purchased separately; a similar-looking third-party card is not automatically compatible.
Require a passcode after the access device
Enable authorization confirmation with a passcode to require both the assigned access device and a code. Set a suitable confirmation time and test the actual user journey. Check the exact hub and keypad firmware before commissioning.
Give each person the access they need.
Personal, shared and temporary access
Assign a personal code to identify a registered user, a keypad code for shared access, or a separate code for someone without an Ajax account. Rapid response unit codes have their own access conditions. The number of users and codes depends on the connected hub.
Change permissions from the app
Assign access to the intended security groups and revoke it when a person no longer needs it. Personal credentials make the event history more useful than a shared code. Review access rights with the owner during handover.
A keypad controls the Ajax system. A code or access device does not by itself turn it into a standalone door-lock controller.
A discreet way to report an emergency.
A separate code for a coercion event
A duress code performs the apparent security action while notifying the configured users and monitoring software of the emergency. Agree the response procedure in advance and test the event route without triggering an unintended dispatch.
Configure who receives the alert
Panic and duress notifications need the correct permissions, recipients and monitoring arrangements. The keypad cannot guarantee a response time. Show users which action generates an emergency event and which action only changes the armed state.
Keep the control point connected.
Superior Jeweller
Superior Jeweller carries events, commands and status over an open-space range of up to 3,000 m. The achievable range depends on the hub, building and interference.
Requires a compatible hub with OS Malevich 2.35 or later. Check the exact model and radio region in the current compatibility list.
Grade 3 starts with the complete system.
Keep the radio protection consistent
Superior Jeweller provides encrypted communication and enhanced frequency hopping when every connected wireless device supports it. Adding a regular Jeweller device changes the system’s radio behaviour and limits the system to Grade 2.
Grade 3 is not guaranteed by buying one G3 device. An accredited Ajax partner must check the hub, every connected device, radio settings, installation and monitoring requirements together. Check the enhanced-hopping status in the app.
Long operation on replaceable batteries.
Four AA batteries, up to 4.5 years
The pre-installed cells supply the keypad without a wired power connection. Actual life depends on interactions, reader use, polling, temperature and reception. Check low-battery notifications and arrange replacement before operation is affected.
Protection that also watches itself.
Limit repeated authentication attempts
Enable automatic lockout after repeated failed attempts and choose a suitable lock duration. The system reports the event; an authorised user or PRO can manage the lockout in the app. Test the configured behaviour with the owner.
Monitor the mounting and connection
Tamper protection reports interference with the mounting. Regular exchanges let the hub supervise the connection and identify the affected device and room. The loss-reporting delay depends on the configured polling settings.
A connection-loss example of 36 seconds requires a 12-second polling interval and three missed packets. Verify the installed configuration.
Install in the intended surroundings.
Indoor placement
Use indoors from −10 to +40 °C and up to 75% humidity. The enclosure is rated IP30/IK06.
Install for everyday use. Test every access method.
Choose the height and fix SmartBracket
An accredited Ajax partner checks the location, fixes the specified mounting points and secures the enclosure. Test tamper reporting and leave enough room to reach the controls and present an access device.
Find the right control device.
Compare keypads, key fobs and panic buttons across ranges. See how people arm the system, identify themselves, operate a routine or ask for help.
Compare control devices →Every detail, in one place.
Communication
- Superior Jeweller data transfer protocol
- Two-way encrypted radio for events, commands and device status. Enhanced protection depends on the complete system configuration.
- Frequency bands
- 865.0–868.0 MHz 868.0–868.6 MHz 868.7–869.2 MHz 869.4–869.65 MHz
- Maximum effective radiated power (ERP)
- up to 20 mW Automatic power control to reduce power consumption and radio interference.
- Radio signal modulation
- GFSK
- Radio communication range
- up to 3,000 m Between the device and a hub (or a range extender) in open space. The maximum range depends on the hub model.
- Encrypted communication
- Encrypted device communication protects transmitted system data.
- Frequency hopping
- To prevent radio interference and jamming.
Key features
- Sensor type
- capacitive
- Authentication methods
- access codes Tag key fobs Pass cards
- Access codes
- keypad code 1 per each Superior KeyPad Plus G3 Jeweller. user codes 1 per user. The total number depends on the hub model. unregistered user codes 1 per user not registered in an Ajax system. The total number depends on the hub model. duress codes 1 per each Superior KeyPad Plus G3 Jeweller and 1 per each user. The total number depends on the hub model.
- Contactless access
- DESFire® EV1, EV2, EV3 ISO 14443-А (13.56 MHz)
- Arming without entering a code
- When enabled, this feature allows users to arm the facility without entering a code or presenting an access device.
- Group security management
- Users can change the security mode of groups they have access to directly from the keypad.
- Authorization confirmation with a passcode
- This feature activates two-factor authentication. When enabled, users must first present an access device (Pass or Tag) and then enter a passcode to confirm authorization.
- Function button
- Operates in one of the following modes: panic Sends an alarm to the central monitoring station and users. Also activates the sirens connected to the system. mute fire alarm Mutes alarms triggered by interconnected fire detectors. none The button is disabled.
- Indication of malfunctions and security mode
- When enabled, the keypad uses LED indicators to show the current security mode, as well as detector malfunctions or loss of communication with the hub.
- ACE Type
- type B
Sabotage protection
- Unauthorized access auto-lock
- The keypad locks if an incorrect code is entered or unverified access devices are used more than 3 times in a row within 1 minute. The lock duration can be adjusted by a PRO or user with admin rights in an Ajax app.
- Tamper alarm
- The system sends notifications about attempts to detach the keypad from the surface or remove it from the mounting panel.
- Holding screw
- Secures the device on SmartBracket.
- Protection against spoofing
- Ensures device authentication during communication with a hub.
- Communication loss detection
- after 36 seconds of no signal Detection time depends on Jeweller or Jeweller/Fibra settings.
Power supply
- Battery
- 4 × AA Pre-installed.
- Type
- type C
- Calculated battery life
- up to 4.5 years
- Operating voltage range
- 2.25−3.30 V⎓
- Nominal operating voltage
- 3 V⎓
- Quiescent current consumption at nominal voltage
- 130 μA
- Maximum current consumption at nominal voltage
- 10.5 mA
- Full battery capacity
- 6,000 mAh
- Low battery voltage
- 2.5 V⎓
- Low battery recovery voltage
- 2.7 V⎓
- End-of-life battery voltage
- 2.25 V⎓ The device switches off.
- End-of-life battery capacity
- 500 mAh
- Manufacturer
- Energizer
Enclosure
- Dimensions
- 165 × 113 × 20 mm
- Weight of the black device
- 252 g
- Weight of the white device
- 270 g
- Operating temperature range
- from −10 °C to +40 °C
- Operating humidity
- up to 75%
- Protection class
- IP30, IK06
What’s in the box
- Superior KeyPad Plus G3 Jeweller
- 4 × AA battery (pre-installed)
- SmartBracket mounting panel
- Installation kit
- Quick start guide
For your installation
- Selected as part of an installer-reviewed security or automation project.
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- The device is designed for indoor use only.