MAKE IT YOURS
Superior Hub Hybrid.
Hybrid control panel supporting photo verification. Works with Fibra and Jeweller devices. Connectable via Ethernet and two SIM cards.
Standards and certifications
Superior Hub Hybrid (2G) · HH.2G.F. Manufacturer-listed marks; regional and installation conditions apply.
See Ajax for the certified model and installation conditions.
Bring wired and wireless protection together.
Superior Hub Hybrid combines Fibra wiring with compatible wireless Ajax devices in one alarm system. Eight wired lines, Ethernet and two SIM slots support a professionally planned installation with photo verification. Choose the 2G or 4G cased model, or the 4G board for a compatible Ajax Case.
Key features. At a glance.
Built-in connectivity
Ethernet
2 SIM cards
Cellular and radio modules
Power supply unit
Up to
100 devices
wired or wireless
Fibra line topologies1
Beam
Ring
Tree
8 lines
to connect wired Ajax Superior devices
Wired and wireless communication range2
up to 2,000 m
Up to 100 devices on a single line3
for cost-effective cabling
Communication with devices4
Fibra
Superior Jeweller
TurboWings
VoRF
Security groups
up to 9
Automation scenarios
up to 32
Visual alarm verification support
Up to 60 hours of autonomous operation5
on a 12 V⎓, 7 Ah backup battery
Compliance6
- 1The Tree topology is built using additional Fibra accessories: Superior LineSplit Fibra and Superior LineSupply (75 W) Fibra.
- 2For wired communication, the value applies when a U/UTP cat.5 4×2×0.51 mm (24 AWG) cable is used. For wireless communication, the value applies in open space.
- 3Within the 100-device hub total and the calculated line power budget.
- 4Check the exact device, regional radio band and firmware for supported functions.
- 5A separate 12 V battery provides backup power. Ajax’s 60-hour example uses a 7 Ah battery with 30 wired devices. The cased hub accepts the battery sizes specified in its manual.
- 6Manufacturer-listed marks for this product range. Exact-model certification and regional conditions are shown above.
- 7Superior Hub Hybrid (2G) does not support the ExternalAntenna connection.
Overview of this product range. Features and ratings can differ by version. Ajax product information ↗ · Superior Hub Hybrid (2G) specifications ↗
Protection in real places.
Superior Hub Hybrid
Every detail has a purpose.
Explore the function, installation and system requirements of Superior Hub Hybrid.
Loading detail…
Make room for the whole system.
Devices, areas and users
Plan for up to 100 Ajax devices, 50 users, 9 security groups and 50 rooms. Groups allow authorised users to manage different areas of a site.
The 100-device total includes both wired and wireless equipment. Wireless capacity also depends on the configured polling interval.
Keep a route for the alarm.
Built-in communication
Ethernet and two micro-SIM slots provide alternate internet paths. The 2G model supports 2G networks; the cased 4G and 4G board models support 2G/3G/LTE. There is no built-in Wi-Fi.
An available alternate connection can take over automatically. Switching between SIM cards can take up to four minutes; two SIM slots do not provide two simultaneous cellular modems. Coverage and an active data service are required.
Plan the wiring around the building.
A line from the hub
A Fibra beam carries power, alarms, events and supported photo data along a four-core cable. Plan the connected load and voltage at the last device before deciding the route.
Up to 2,000 m with the specified copper U/UTP cat.5 cable, subject to the complete line calculation. Terminate a beam as described in the installation manual.
Size the load as carefully as the device count.
A power budget for the complete line
Up to 14.4 W in total for connected wired devices, with a maximum rated output of 0.53 A. This is a shared budget across the eight lines.
Cable length and resistance, the device mix and peak demand determine the usable load. Additional power modules need their own design and backup provision. Run the manufacturer’s calculator and on-site power test before handover.
Wireless devices alongside the cable.
Separate jobs for the radio links
Jeweller carries alarms, events and commands; Wings carries photo data. The exact technical tables specify up to 2,000 m for Jeweller and 1,700 m for Wings in open space.
The connected device can impose a shorter limit. Walls, metal and interference reduce practical range. Choose matching radio-frequency regions and check each device and firmware in the compatibility table.
Place the antenna where the signal works.
Match the antenna to the exact hardware
ExternalAntenna for cellular communication is supported by Superior Hub Hybrid (4G) revision 2, manufactured from June 2025, and by the 4G board version. It is not supported by the 2G model or automatically by every earlier 4G unit.
ExternalAntenna is sold separately. The system can supervise its connection; install and test the correct Ajax antenna and cable arrangement.
See the context behind an alarm.
Photos from compatible detectors
Compatible photo detectors send a series of images with the alarm. Supported PhOD models can also provide photos on demand or in configured scenarios, with separate access permissions.
Available triggers, resolution and delivery time depend on the exact detector, firmware and connection. Cameras and NVRs use their own network and storage; this hub is not a continuous video recorder.
Let the system respond to a plan.
Actions across connected devices
Use up to 32 automation scenarios with compatible equipment. Supported triggers include alarms, schedules, security modes, environmental measurements and a configured button.
The connected device determines the available action. Plan the electrical load and any required safety interlocks separately, then test the scenario on the completed installation.
Plan for normal operation and a power cut.
Main power
The built-in power supply connects to 100–240 V AC mains. A qualified installer plans isolation, wiring and cable protection together with the hub position.
Longer standby, with a different connection pattern.
Battery Power Saver
The supported battery-saving mode can put the hub into standby after mains power is lost. It temporarily disables external connection channels and wakes for events or the configured server checks.
During standby the hub is not continuously connected to Ajax Cloud or the monitoring station, and app configuration and arming controls are unavailable. Ajax states that enabling this mode does not comply with EN 50131 Grade 2 or 3. Decide with the installer and monitoring provider whether the mode suits the installation.
Protection that also checks itself.
An enclosure that reports interference
Tamper supervision can report an opened or detached enclosure. Cased versions use their specified tamper arrangement; a board installation needs the compatible Case tamper connected and tested.
Recognise the connected device
Device authentication and encrypted communication help prevent a substituted device from being accepted as part of the system.
Notice a lost connection
The hub regularly polls connected equipment and reports a missing link according to the configured interval and missed-packet threshold.
The illustrated 36-second example is configuration-dependent. Device polling is adjustable from 12 to 300 seconds, and a shorter interval can reduce the supported wireless device count.
One interface, with access for the right people.
Users, installers and monitoring
Ajax apps bring devices, events and permitted controls together. PRO access allows system configuration, while user and group permissions define which areas each person can manage.
Remote management requires the hub’s connection to Ajax Cloud. Photo permissions are separate. OS Malevich updates and device compatibility must be checked before enabling a new function; a shared enclosure does not imply identical electronics.
From a planned circuit to a tested system.
Install the correct enclosure
An accredited Ajax partner mounts the supplied casing or the board in its compatible Ajax Case. Plan mains isolation, cable entry, battery space and tamper protection before connecting equipment.
Find the right hub.
Choose the control panel for your alarm system. Compare device connections, alarm photos, internet routes and power for the exact hub version.
Compare hubs →Every detail, in one place.
Capacity
- Ajax devices
- up to 100 Wired and wireless devices in any proportion. 5 range extenders max. 10 sirens max. 50 wired keypads with a built-in buzzer max (with OS Malevich 2.30 and later versions).
- Users
- up to 50 Any number of admin users within the limit. PRO accounts for installers and monitoring companies. Access management for regular users.
- Automation scenarios
- up to 32 Alarm reactions. Scheduled actions. Security mode changing reactions. Temperature changing reactions. Humidity changing reactions. Reactions to changes in CO₂ concentration. Reactions to pressing the Button.
- Security groups
- up to 9
- Rooms
- up to 50
- Event log
- up to 1000 events Events are saved on the non-volatile onboard flash memory.
Wired communication
- Fibra communication technology
- Proprietary wired communication technology. Fibra combines the reliability of wires with the freedom of radio connection. It features: Two-way communication. Advanced anti-sabotage. Instant notifications. Remote configuration via the Ajax apps.
- Compatible wire
- 4–core cable Bus connection.
- Input
- 8 Fibra lines Compatible with Fibra devices only.
- Fibra line length
- up to 2,000 m When using the U/UTP cat.5 twisted pair.
- Power supply of devices
- up to 14.4 W For all connected wired devices.
- Output voltage range
- 19–24 V⎓
- Topologies
- Star Ring In the line breakage event, the ring splits into two working segments, the devices continue to operate, and the system notifies a security company and users about the incident.
- Devices polling interval
- from 12 to 300 s Adjusted by PRO or user with admin rights in the Ajax app.
Wireless communication
- Jeweller communication technology
- Proprietary wireless communication technology to transmit alarms and events. It features: Two-way communication. Advanced anti-sabotage. Block encryption featuring a dynamic key. Instant notifications. Remote configuration via the Ajax apps.
- Frequency bands
- 866.0 – 866.5 MHz 868.0 – 868.6 MHz 868.7 – 869.2 MHz 905.0 – 926.5 MHz 915.85 – 926.5 MHz 921.0 – 922.0 MHz Depends on the region of sales.
- Maximum effective radiated power (ERP)
- up to 20 mW Featured automatic power control to reduce power consumption and noise interference.
- Radio signal modulation
- GFSK
- Radio signal range
- up to 2,000 m Between the hub and connected devices (in an open space). Maximum range depends on the connected device.
- Polling interval
- from 12 to 300 s Adjusted by PRO or user with admin rights in the Ajax app.
- Encrypted communication
- All the data stored and transmitted are protected by block encryption with a dynamic key.
- Wings communication technology
- Proprietary wireless communication technology to transmit photo verifications. It features: Two-way communication. Block encryption featuring a dynamic key. Advanced anti-sabotage. Package re-uploading in case of transmission errors. Photo delivery check.
- Frequency bands
- 866.0 – 866.5 MHz 868.0 – 868.6 MHz 868.7 – 869.2 MHz 905.0 – 926.5 MHz 915.85 – 926.5 MHz 921.0 – 922.0 MHz Depends on the region of sales.
- Radio signal range
- up to 1,700 m Between the hub and connected devices (in an open space). Maximum range depends on the connected device.
- Radio frequency hopping
- Radio communication uses frequency hopping to prevent interception and jamming.
Communication channels
- Ethernet
- 1 × 8P8C socket Up to 100 Mbps.
- Cellular
- 2 × micro–SIM slot
- Cellular bands
- 2G (GSM900/DCS1800 (B3/B8))
- Automatic switching between communication channels
- Switching between SIMs — up to 4 minutes. Switching between Ethernet and SIM — instantly.
- Communication channels prioritization
- Ethernet Cellular connection Communication channels work in parallel to increase system reliability. Most of the data is transmitted via Ethernet.
- Alarm Transmission System Categories
- SP2, SP5, DP3
- Control panel operation method
- Pass-through
- Signaling security
- S2 Substitution security.
- Information security
- I2
Notifications
- Supported notification types
- Push SMS Calls
- Event types
- Alarms Malfunctions Events Security mode changing The notification types are configured individually for each user. Notifications could be customized for A–F schemes according to EN 50131 requirements.
Photo verification
- Photo verification types
- Photo by alarm Photo by scenario Photo on demand Photo by schedule The Photo by Schedule feature is available for hubs with firmware version OS Malevich 2.19 or higher.
- Photo delivery time
- up to 9 s By default.
- Photo resolution
- up to 640 × 480 pixels Depends on the detector.
- Number of photos in a series:
- from 1 to 5 pictures
Monitoring
- Supported protocols
- SurGard (Contact ID) SIA (DC-09) Other proprietary protocols
- Event types
- System alarms and events Photo verifications Panic button coordinates
Power supply
- Main power supply type
- Type A.
- Device operating AC voltage range
- 100–240 V~, 50/60 Hz From the main power supply. Up to 10 W of mains power consumption.
- Device operating DC voltage range
- 10.5–15 V⎓ From the backup battery (not included). Hub has space in the enclosure and rails for installing batteries with a capacity of 4, 7, or 9 Ah.
- Autonomous operation
- up to 60 hours Superior Hub Hybrid with a 7 Ah backup battery can power a system of 30 wired devices for 60 hours. Wireless devices operate on batteries and do not require additional power supply. The Battery Power Saver feature allows extending the backup battery life.
- Low battery voltage
- 11.7 V⎓
- Low battery recovery voltage
- 12.9 V⎓
- End of life battery voltage
- 11 V⎓ Superior Hub Hybrid is switched off.
- Maximum output peak-to-peak ripple battery voltage
- 220 mV⎓
- Minimum backup battery energy level in the charged state
- 100 %
Current consumption
- Maximum rated output
- 0.53 A
- Maximum at nominal voltage
- 105 mA
- Quiescent at nominal voltage
- 95 mA
- Average*
- up to 90 mA When GSM and Ethernet are enabled. up to 50 mA When Ethernet is disabled. * From the backup battery after the loss of the main power supply.
Casing
- Dimensions
- 197 × 240 × 100 mm
- Weight of the white device
- 837 g
- Weight of the black device
- 765 g
- Operating temperature range
- from −10 °C to +40 °C
- Operating humidity
- up to 75%
- Protection class
- IP40, IK06 IP30 tested by CNPP according to NFa2P.
What’s in the box
- Superior Hub Hybrid (2G)
- Power cable
- Screw terminal block Adapter (only for INCERT compliance)
- Battery connection cable
- Ethernet cable
- Casing
- Installation kit
- Eight 120 Ω termination resistors
- Quick start guide
For your installation
- Selected as part of an installer-reviewed security or automation project.
- Fibra needs a supported hybrid control panel, checked cable type and topology, termination and a complete power budget. Existing alarm cabling is not automatically suitable.
- 100–240 V~ power supply. For indoor use only.
- Choose the exact version: sensing, power, casing, pack size or interface details can differ between the listed models.
Optional additions
Product documents.
Find the right protection.
ExternalAntenna
Check the exact hub revision, connector and installation requirements.
Superior LineSupply Fibra
Review a compatible power module as part of the complete Fibra load calculation.
Case E (395)
For the supported board version, with the correct holders and installation conditions.