MAKE IT YOURS
StreetSiren.
Wireless siren for outdoor and indoor use
Standards and certifications
StreetSiren Jeweller · SS.Y.J. Manufacturer-listed marks; regional and installation conditions apply.
An alarm you can see and hear.
StreetSiren Jeweller combines a powerful sounder with a bright LED frame for indoor or outdoor warning. Configure its response to alarms and everyday events, choose the volume, and monitor its status in the Ajax app. Batteries allow cable-free operation, with an optional external supply for a wired power arrangement.
Key features. At a glance.
Adjustable volume
for alarms and other events
Adjustable alarm duration1
Bright LED frame
Chime feature2
Holding screw
for reliable fastening and protection against quick dismantling
Terminals for connecting an external power supply
Tamper
to react to enclosure opening and accelerometer to detect attempts to move or dismount the siren
Indication of security mode change and delay when entering or leaving
Power adjustment
Remote control and configuration
After-alarm indication
Up to 1,500 m3
of wireless communication with an Ajax hub or range extender
Informative push notifications
Up to 5 years
of operation on pre-installed batteries
Over-the-air (OTA) firmware updates4
Two colors
Hassle-free installation
- 1From 3 s to 3 min; up to 15 min for sirens with NA 5.60.4.14 or later firmware version.
- 2Requires additional installation of an Ajax opening detector.
- 3In an open space. Range is measured in open space; walls and installation conditions reduce it.
- 4OTA firmware updates are available for sirens with firmware version 10.63.1.17 or later in systems where a hub and range extender support Wings technology.
Ajax product information ↗ · StreetSiren Jeweller specifications ↗
Protection in real places.
StreetSiren Jeweller
Every detail has a purpose.
Explore the function, installation and system requirements of StreetSiren Jeweller.
Loading detail…
A visible and audible outdoor alarm.
Up to 113 dB at 1 m
Set the alarm level to 85, 100 or 113 dB and choose the detector events that should activate it. The LED frame adds a visible warning.
Normal alarm duration is 3 seconds to 3 minutes. The 15-minute option is restricted to NA firmware 5.60.4.14 or later at Quiet or Loud volume.
Clear feedback at the entrance.
Entry and exit delays
Configured delay beeps tell users when they need to leave or disarm.
Built for an exposed mounting position.
IP54 protection
The housing resists dust and splashing water and is specified for −25°C to +60°C. A protected buzzer and robust enclosure help it work outdoors.
Install at least 2.5 m high where practical. IP54 does not mean protection against immersion or high-pressure washing.
Battery operation, with optional external power.
Four CR123A batteries
Preinstalled batteries provide up to five years under the stated conditions. Use frequency, sound settings and temperature affect operating life.
An optional 6–20 V DC supply, nominally 12 V, can power the siren. Keep the batteries installed as backup. The supply is separate.
A secure link to your system.
Jeweller communication
Encrypted two-way communication carries commands, alarms and device status between the device and its compatible Ajax hub or assigned range extender.
Up to 1,500 m in open space. Walls, metal and other obstacles reduce usable coverage. Check signal strength at the installation position and use equipment for the same radio-frequency region.
Connect a more distant building.
A planned radio path
Use a compatible range extender to cover a position beyond the hub’s reliable radio range. Test communication at the final siren and extender locations.
Up to five extenders may be supported, depending on the hub. This does not increase the hub’s total device capacity.
Protection that also watches itself.
Opening and removal alerts
The tamper reports opening the enclosure. Secure the fixing points and holding screw to make removal harder.
Movement detection
Enable Alert if Moved so the accelerometer can detect attempts to shake or dismount the siren.
Allow 60 seconds for the accelerometer to learn its mounted position before testing.
Device supervision
The hub monitors communication and receives named maintenance and alarm events.
Connection-loss detection depends on polling settings.
Updates on supported versions.
Check the supplied siren revision
Over-the-air firmware updates are supported on StreetSiren with firmware 10.63.1.17 or later. A permitted administrator or PRO starts an available update through the Ajax app.
Wings carries firmware data on supported sirens. This is a sounder, not a photo detector; the presence of Wings does not add a camera or photo verification.
Set up for the way the site works.
Connect
Scan the device QR code in the Ajax app, then assign a recognisable name and room. Check compatibility with the hub and any range extender before installation.
Find the right siren.
Compare indoor and outdoor sirens across Baseline, Superior and Fibra. See how sound, light, power and everyday notifications fit the place you want to protect.
Compare sirens →Every detail, in one place.
Communication
- Jeweller communication technology
- Two-way system communication for the functions specified for this model.
- Radio communication range
- up to 1,500 m Between the device and a hub (or a range extender) in an open space.
- Encrypted communication
- Encrypted device communication.
- Frequency hopping
- To prevent radio interference and jamming.
- Wings communication technology
- Two-way system communication for the functions specified for this model.
- Radio communication range
- up to 900 m Between the device and a hub (or a range extender) in an open space.
- Encrypted communication
- Encrypted device communication.
Key features
- Alarm type
- acoustic and LED Buzzer and LED frame.
- Type of warning device
- type X External, self-powered, and remote power source compliant with EN 50131-6.
- Alarm volume
- from 85 to 113 dB at a distance of 1 m Adjusted by PRO or user with admin rights in the Ajax app.
- Alarm duration
- from 3 s to 3 min Alarm duration up to 15 minutes is available only for siren with firmware version NA 5.60.4.14 or higher and with Quiet or Loud alarm volume. Adjusted by PRO or user with admin rights in the Ajax app.
- Siren sound frequency
- 1.60−4.5 kHz
- Acoustic output type
- tone
- Events indication
- Alarms.; Delays when entering/leaving.; Security mode.; Security mode changing. ; After-alarm indication.
Sabotage protection
- Tampering alarm
- Notifications on attempts to open the siren’s enclosure.
- Accelerometer alarm
- Notifications on attempts to move or shake the siren, or detach it from the surface.
- Protection against spoofing
- device authentication
- Communication loss detection
- after 36 s Detection time depends on the Jeweller or Jeweller/Fibra settings.
Main power supply
- Battery
- 4 × CR123A Pre-installed.
- Calculated battery life
- up to 5 years
- Siren’s operating voltage range
- 3.65−6.2 V⎓
- Full battery capacity
- 6,400 mAh
Optional power supply
- Remote power supply’s operating voltage
- 6−20 V⎓
- Remote power supply’s nominal voltage
- 12 V⎓
Enclosure
- Dimensions
- 200 × 200 × 51 mm
- Weight
- 528 g
- Operating temperature range
- from −25°C to +60°C
- Operating humidity
- up to 95%
- Protection class
- IP54
What’s in the box
- StreetSiren Jeweller
- SmartBracket mounting panel
- Installation kit
- 4 × CR123A battery (pre-installed)
- Quick start guide
For your installation
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- The siren is designed for indoor and outdoor use. Recommended installation height is 2.5 m and higher.
Find the right protection.
HomeSiren Jeweller
Use a dedicated indoor siren in rooms where an outdoor sounder may be difficult to hear.
ReX 2 Jeweller
Compare a range extender with an Ethernet connection to the hub.