MAKE IT YOURS
SpeakerPhone.
Wireless voice module for alarm verification
A voice connection when it matters.
SpeakerPhone Jeweller brings two-way audio alarm verification to a compatible Ajax system. A monitoring operator can talk to someone at the property or listen to the situation through its speaker and microphone. Recording permissions, call routing and optional audio scenarios are configured for the installation, so the response matches the property and monitoring service.
Key features. At a glance.
Three ways to get in touch in case of an alarm
The CMS operator calls the site
Hub automatically calls the CMS
CMS requests a callback from the site
Audio alarm verification1
two-way voice communication or pre- and post-alarm recordings
AI-powered sound optimization
for clear voice transmission
Up to 10 m
distance of voice audibility
Up to 12 hours
of operation in a conversation mode
Option to use a SIP server
for communication between the hub and CMS
Automatic over-the-air updates
without additional maintenance
Up to 3 years of operation
with pre-installed batteries
12 V⎓, 1 A
optional external power supply
Up to 10 voice modules3
in a single Ajax system
Power adjustment
Informative push notifications
Tamper alarm
Holding screw
for reliable fastening
Two colors
Up to 1,700 m4
distance of radio communication with an Ajax hub
Remote control and configuration
Hassle-free installation
- 1Pre-alarm recording is possible only when the SpeakerPhone voice module is connected to an external power supply.
- 2Voice over radio frequency.
- 3Requires compatible hub OS 2.27 or later; earlier supported software allows one.
- 4In an open space. Range is measured in open space; walls and installation conditions reduce it.
Ajax product information ↗ · SpeakerPhone Jeweller specifications ↗
Protection in real places.
SpeakerPhone Jeweller
Every detail has a purpose.
Explore the function, installation and system requirements of SpeakerPhone Jeweller.
Loading detail…
Speak to the site when an alarm arrives.
Two-way audio verification
A monitoring operator can speak with someone at the property, hear the situation and decide on the response. The voice connection starts without anyone at the site pressing a talk button.
SpeakerPhone is a monitoring voice module, not a general-purpose home intercom. Call routing must be configured with the monitoring company and a compatible hub.
Make the conversation easier to understand.
Sound for the room
The 3 W speaker offers three volume settings. Test the chosen setting so people in the intended area can hear the operator.
Specified up to 103 dB; 83 dB at a distance of 1 m.
Choose the monitoring connection that fits.
Voice Connect
Ajax offers Voice Connect within PRO Desktop for monitoring voice communication without a separate SIP server.
Confirm the installed monitoring software and enabled functions with the provider. Device selection, broadcasting and volume controls can differ between Voice Connect and a SIP integration.
A short audio record around the event.
Pre- and post-alarm audio
With supported monitoring software and permissions, the module can provide an audio fragment from before or after an alarm. Configure each interval from 1 to 10 seconds, or turn recording off.
Pre-alarm recording requires an external power supply. Playback and downloading require explicit permissions for the user, professional or monitoring company.
Play an agreed message when it is needed.
Custom audio scenarios
Play a prepared clip after a configured event, on schedule or when the security mode changes. A hub supports up to ten uploaded tracks, each up to 15 seconds long, with one to ten repetitions.
Requires SpeakerPhone firmware 6.60.6.9 or later and hub OS Malevich 2.38 or later. Configure tracks through Ajax PRO Desktop and test the intended devices.
Put voice communication in the right rooms.
Up to ten voice modules
With a compatible hub running OS Malevich 2.27 or later, one system supports up to ten SpeakerPhone modules. Room and group assignments help associate the call with the alarm location.
Earlier supported hub software allows one module. Operator switching and broadcasting depend on the monitoring integration. A hub in battery Saving mode cannot receive calls outside its Activity period.
Voice and events have separate radio jobs.
VoRF audio
VoRF carries the two-way conversation with a compatible hub. A call session can be configured for up to ten minutes.
Up to 1,700 m in open space. SpeakerPhone does not work through Ajax radio range extenders; check the direct hub link.
Choose battery operation or external power.
Replaceable batteries
Four preinstalled CR123 batteries provide up to three years of standby operation or up to twelve hours of conversation under the stated conditions. The app reports a low battery.
Audio use, settings and signal quality affect battery life.
Keep the device ready for a call.
Remote firmware updates
An administrator or a professional with the appropriate permissions can install available firmware through Ajax apps.
The hub needs an Ethernet or Wi-Fi connection to Ajax Cloud for updates. External power to SpeakerPhone is not required.
Watch the voice module as well as the site.
Removal and microphone alerts
The device reports removal from SmartBracket and damage to the microphone. Secure the mounting panel and holding screw, then test the tamper event.
Authenticated and encrypted communication
The hub authenticates the module, and encrypted communication protects system data.
Connection supervision
Regular exchanges let the hub report a missing module or a fault.
A 36-second loss-detection time requires three missed packets at a 12-second polling interval. Other polling settings take longer.
Set up the whole audio path.
Add the module
Pair the module by its QR code in the Ajax app and assign a recognisable room and name.
Find the right voice module.
Plan SpeakerPhone for two-way conversation with an alarm-monitoring operator, including hub coverage, power and recording permissions.
Check voice communication →Every detail, in one place.
Communication
- VoRF communication technology
- Two-way system communication for the functions specified for this model.
- Radio communication range
- Between the device and a hub in an open space.
- Frequency band
- 863.0–865.0 MHz
- Jeweller communication technology
- Two-way system communication for the functions specified for this model.
- Radio communication range
- up to 1,700 m Between the device and a hub in an open space.
- Encrypted communication
- Encrypted device communication.
- Frequency hopping
- To prevent radio interference and jamming.
Key features
- AI-powered sound optimization
- It provides: Clear voice transmission.; Suppression of extraneous noise.; Improved audibility even at long distances.; Option to set up the AI feature in Ajax apps.
- Voice audibility
- up to 10 m Auto adjustment of the microphone sensitivity.
- Output speaker power
- 3 W
- Speaker volume
- up to 103 dB 83 dB at a distance of 1 m.
- Frequency range
- from 200 Hz to 16 kHz
- Audio codec
- Opus
- Remote firmware update
- When a new firmware is available, an admin or PRO with the rights to configure the system can run the update in Ajax apps. The hub must be connected to Ajax Cloud via Ethernet or Wi-Fi.
Sabotage protection
- Tamper alarm
- Notifications on attempts to detach the device from the surface.
- Microphone cut-off detection
- Notifications of attempts to damage an in-built microphone.
- Holding screw
- To secure the device on SmartBracket.
- Protection against spoofing
- device authentication
- Communication loss detection
- after 36 s Detection time depends on the Jeweller settings.
Power supply
- Battery
- 4 × CR123 Pre-installed.
- Calculated battery life
- up to 3 years In a standby mode. up to 12 hours In a conversation mode.
- Optional external power supply
- 12 V⎓, 1 A The power supply cable length should not exceed 10 m when using the 2 × 0.35 copper-conductor cable. When the external power supply is connected, the batteries operate as a backup power source.
Enclosure
- Dimensions
- 112 × 112 × 42 mm
- Weight
- 270 g
- Operating temperature range
- from 0 °C to +40 °C
- Operating humidity
- up to 75%
- Protection class
- IP50
What’s in the box
- SpeakerPhone Jeweller
- SmartBracket mounting panel
- Installation kit
- Quick start guide
For your installation
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- It is recommended to install the device at a height of 1.6 m.
- The device is designed for indoor use only.
Find the right protection.
Button Jeweller
A configured auxiliary or panic event can form part of the monitoring response.
MotionCam HDR (PhOD) Jeweller
Use photo verification alongside the agreed audio response.