MAKE IT YOURS
MotionCam Outdoor (PhOD).
Wireless PIR motion detector with extended photo verification possibilities. For outdoor and indoor use.
Standards and certifications
MotionCam Outdoor (PhOD) Jeweller · MC.OP.J. Manufacturer-listed marks; regional and installation conditions apply.
Check the approach with a photograph.
MotionCam Outdoor (PhOD) Jeweller detects movement around the property and provides photographs to help explain an alarm. Authorised users can also request images or use supported photo scenarios. Outdoor detection, anti-masking protection and controlled photo access bring the approach to the building into the same Ajax security system.
Key features. At a glance.
Several types of photo verification
9 seconds1
to deliver the first photo
Series of up to 5 photos
IR illumination
for low-light conditions
3–15 meters
detection zone
Jeweller and Wings radio communication
Power adjustment
0.8–1.3 m
recommended installation height
Pet immunity
up to 80 cm tall
Two PIR sensors
Up to 1,700 m2
communication range with an Ajax hub or range extender
software algorithms for filtering out false alarms
Temperature compensation
for effective detection in heat and cold
HDR technology for clear photos in any conditions
Informative push notifications
Hassle-free installation
Remote control and configuration
- 1With default settings (photo resolution is 320 × 240 px). Learn more.
- 2In open space. Range is measured in open space; walls and installation conditions reduce it.
Ajax product information ↗ · MotionCam Outdoor (PhOD) Jeweller specifications ↗
See what happened outside.
These are event-based still photographs. Continuous live video requires a surveillance camera.
On alarm
Detected movement can trigger a series of photographs alongside the alarm event, helping you assess the situation before deciding how to respond.
First-photo delivery from 9 seconds applies at the default 320 × 240 resolution under the manufacturer’s connection conditions.
A clearer view of the event.
Camera and infrared illumination
The detector can send one to five images in a series. Infrared illumination supports photos in low light, and supported HDR processing improves detail in difficult lighting.
Available image processing and photo modes depend on the detector revision, firmware and compatible system. Confirm them for the exact supplied version.
Your photos. Your permissions.
Control access
The Privacy settings determine who can request and view photographs and when requests are allowed.
Requests leave a record
The event history identifies the request, the device and the user. This makes access to visual information visible to the people managing the system.
Protected photo transfer
Photos are encrypted during transmission and storage. Access remains subject to the system’s permissions.
Separate movement from outdoor interference.
Two PIR sensors
LISA compares signals from two independent PIR sensors. When both see movement, their waveforms help distinguish an intrusion from environmental interference.
Designed for exposed locations.
Enclosure and hood
The IP56 enclosure supports outdoor use from −25 °C to +60 °C. The supplied hood helps shield the masking sensors from rain and snow.
Keep the view clear, check signal and detection at the final position, and follow the exact manual’s installation restrictions.
Power for everyday protection.
Replaceable battery power
Replaceable preinstalled CR123A batteries support up to three years of operation. Photo use and operating conditions affect the interval between replacements.
Battery life depends on settings, use, temperature and signal conditions. Respond to the app’s low-battery notification.
A secure link to your system.
Jeweller and Wings communication
Jeweller carries events and status while Wings carries photographs. Both radio paths need a compatible hub or photo-capable range extender.
The stated range is up to 1,700 m in open space. Walls, metal and the actual installation reduce usable coverage.
Reach the areas your system needs.
Plan around walls and distance
Test the signal where the detector will be installed. If coverage is insufficient, select a compatible range extender; an Ethernet-equipped model provides another route back to the hub.
Range extenders are optional equipment. Supported models and quantities depend on the exact hub; photo verification additionally requires a photo-capable extender.
Know that protection is working.
Device state in the app
The detector reports its condition to the hub. Communication, power and tamper information help identify a device that needs attention. Clear device and room names make an alert easier to act on.
Professional alarm monitoring is a separate service. Notification and connection-loss timing depend on system settings and connectivity.
Protection that also watches itself.
Removal alerts
The tamper reports attempts to remove the detector from its mounting panel. Secure the mounting arrangement and check that the event reaches the intended users.
Authenticated communication
The hub checks the detector’s identity during communication. Encryption protects the exchanged data, while authentication helps reject a device attempting to impersonate it.
Detect an obstructed view
The anti-masking system reports attempts to cover the detector or obstruct its view. Keep the masking sensors clear and fit the supplied hood as instructed.
Installed for your actual space.
Connect
Scan the device QR code to add it to a compatible hub. Assign a clear name and the room or area where it will operate.
Find the right motion detector.
Compare indoor, outdoor and curtain detectors across Baseline and Superior. See what changes for the place you protect, alarm photos, animals and installation.
Compare motion detectors →Every detail, in one place.
Communication
- Jeweller communication technology
- Two-way system communication for the functions specified for this model.
- Radio signal range
- up to 1,700 m Between detector and control panel or range extender in an open space.
- Encrypted communication
- Encrypted device communication.
- Frequency hopping
- Radio communication uses frequency hopping to prevent interception and jamming.
- Wings communication technology
- Two-way system communication for the functions specified for this model.
- Radio signal range
- up to 1,700 m Between detector and control panel or range extender in an open space.
- Frequency hopping
- Radio communication uses frequency hopping to prevent interception and jamming.
Detection
- Sensitive elements
- 2 × PIR sensor
- Motion detection distance
- up to 3–15 m When installed at a height of 0.8–1.3 m. Adjusted with a scrollbar on the device enclosure.
- Motion detection angles
- horizontal — 90°; vertical — N/A
- Motion detection speed
- from 0.3 to 2.0 m/s The direction of the detector lens should be perpendicular to an alleged intrusion path into the facility.
- Sensitivity
- 3 levels Adjusted by PRO or user with admin rights in the Ajax app.
- Pet immunity
- weight: not relevant; height: up to 80 cm
- False alarm prevention
- LISA SmartDetect Software algorithms.
Photo verification
- Photo by alarm
- A built-in camera is activated if the detector is armed, and motion is detected.
- Photo on demand
- User takes pictures at any time or when the detector is armed (depends on settings). The feature is disabled by default.
- Photo by scenario
- A detector camera takes pictures automatically when Ajax fire detectors are triggered. The feature is disabled by default.
- Photo by schedule
- The detector automatically takes photos at a specified time. This feature is available for hubs with firmware version OS Malevich 2.19 or higher.
- Photo by arming/disarming
- The detector automatically takes photos when the security state is changed.
- Photo resolution
- 640 × 352 px; 320 × 176 px (by default) Adjusted by PRO or user with admin rights in the Ajax app.
- Camera viewing angles
- horizontal — 105°; vertical — 50°
Sabotage protection
- Anti-masking system
- The detector is equipped with masking sensors reacting to hindering, covering and painting the lens.
- Tampering alarm
- Alerts of attempts to detach the detector from the surface or remove it from the mounting panel.
- Protection against forgery
- device authentication
- Communication loss detection
- within 36 s Detection time depends on the Jeweller settings.
Power supply
- Battery
- 4 × CR123A Pre-installed.
- Calculated battery life
- up to 3 years With Delay when entering feature disabled.
- Operating voltage range
- 4−6.4 V⎓
- Full battery capacity
- 3,200 mAh
Enclosure
- Dimensions
- 206 × 108 × 93 mm
- Weight
- 470 g
- Operating temperature range
- from −25 °C to +60 °C
- Operating humidity
- up to 95%
- Protection class
- IP56
What’s in the box
- MotionCam Outdoor (PhOD) Jeweller
- Hood
- To protect the camera and masking sensors from snow and rain.
- SmartBracket mounting panel
- Installation kit
- 4 × CR123A battery
- Pre-installed.
- Quick start guide
For your installation
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- It is recommended to install the detector at a height of 0.8–1.3 m.
- The device is designed for indoor and outdoor use.
Find the right protection.
MotionCam HDR (PhOD) Jeweller
Explore the indoor photo-verification detector for rooms inside the property.
Hub 2 Plus Jeweller
Explore the hub’s connectivity, capacity and exact device compatibility before planning the system.