MAKE IT YOURS
Hub BP.
Wireless battery-powered control panel. Supports photo verification. Connectable via two SIM cards (2G/3G/LTE).
Standards and certifications
Hub BP Jeweller · HB.BP.J. Manufacturer-listed marks; regional and installation conditions apply.
Protection where there is no mains supply.
Hub BP Jeweller coordinates a wireless Ajax security system using internal or external battery power and two cellular SIM slots. It suits vacant properties, construction sites and remote premises where a permanent mains connection is unavailable. Choose the supplied enclosure or the board version for Case D (430), then plan the battery, cellular coverage and operating mode for the site.
Key features. At a glance.
100 wireless Ajax devices
can be added to a hub
Remote control and configuration
Battery powered1
Internal
up to 50 months in the Battery power saver mode
External
up to 1.5 years on external third-party Zinc-air 12V/600Ah battery in the full-function mode
Up to 2,000 m2
communication range with wireless Ajax devices
Alarm photo verification in 9 seconds3
9 groups
Flexible security management of the facility
2 independent communication channels
2G/3G/LTE
2G/3G/LTE
External antennas
for the signal strength of сellular, Jeweller, and Wings communication channels
Power adjustment
Video surveillance
with Ajax and third-party devices
Stable system operation
with OS Malevich
2 colors
of matte enclosure
Informative push notifications
Effortless installation5
no need to disassemble the enclosure
- 1Runtime depends on battery capacity, hardware revision and mode. See the power section and selected version’s technical specifications.
- 2In open space. Range is measured in open space; walls and installation conditions reduce it.
- 3With default settings (photo resolution is 320 × 240 px).
- 4Manufacturer-listed marks for this product range. Exact-model certification and regional conditions are shown above.
- 5The board version requires a separate Case D (430).
Overview of this product range. Features and ratings can differ by version. Ajax product information ↗ · Hub BP Jeweller specifications ↗
Protection in real places.
Hub BP Jeweller
Every detail has a purpose.
Explore the function, installation and system requirements of Hub BP Jeweller.
Loading detail…
Plan the battery around the site.
Internal and external power
Hub BP uses internal or external DC sources instead of a built-in mains supply. Both power inputs are specified for 4.2–16 V DC, up to 2 A. Batteries and any external power equipment are purchased separately.
Use an approved battery type and the correct connector, polarity and settings. Lead-acid charging from an external source is configurable only for the supported battery setting; do not assume every rechargeable or non-rechargeable pack can be charged in the hub.
Save power with a planned wake-up schedule.
Battery Power Saver
A PRO can enable saving mode separately for the internal and external source, then set the active period and server polling interval. The hub communicates on its wake-up schedule and when the configured events require it.
Saving mode changes when remote controls and updates are available; it is not continuous online access. Supported SMS wake-up requires OS Malevich 2.30 or later. Firmware updates while saving require OS Malevich 2.39 or later. Review event retry limits and wake-up settings before leaving a remote site unattended.
Two SIM slots for a cellular connection.
2G, 3G and LTE
Both versions use two micro-SIM slots for cellular internet. Separate operators can provide an alternative if the active provider is unavailable. This hub has no Ethernet or Wi-Fi interface.
The exact technical specification allows up to four minutes to switch SIM cards. Two SIM slots do not mean two simultaneous cellular modems. Check data service and signal at the installation position.
Plan devices, people and areas together.
100 devices, 50 users, 9 groups
Both enclosure versions support up to 100 Ajax devices, 50 users, 9 security groups and 50 rooms. Groups allow authorised users to control different parts of the property.
The total includes up to 5 compatible range extenders and up to 10 sirens. Extenders need their own suitable power supply at an off-grid site and do not increase the hub’s device limit.
Separate radio links for alarms and photos.
Jeweller and Wings
Jeweller carries alarms, events and commands; Wings carries photo data from compatible detectors. Both use encrypted two-way communication and supervised delivery.
Both exact technical tables specify up to 2,000 m in open space, depending on the connected device. Walls, metal, interference and the device’s own limit affect the usable range.
Move the antenna to a better signal position.
Three communication channels
Separate ExternalAntenna connections serve cellular, Jeweller and Wings communication. The 3 m cable allows the antenna to be positioned away from a difficult hub location.
ExternalAntenna is sold separately. Test each needed channel and keep antenna-state supervision enabled; the manual requires the enclosure to be properly closed for breakage detection.
See what caused the alarm.
A photo series from the detector
Compatible MotionCam detectors provide alarm photographs. Supported PhOD detectors can add photos on demand, by scenario or by schedule with the required settings and permissions.
The 9-second source example uses default 320 × 240 resolution. Actual delivery depends on the detector, signal, communication path and power-saving state. Cameras and NVRs have their own power, network and recording requirements.
Make protection respond to the situation.
Up to 32 scenarios
Use supported alarms, schedules, security modes, environmental measurements or button actions to control compatible equipment. A planned scenario can operate lighting, a valve or an appropriate relay.
Every actuator and controlled load needs its own power and installation design. On a battery-powered site, include those loads and the saving-mode behaviour in the project.
Supervise the enclosure and its connections.
Tamper and device identity
The cased model supervises opening and removal. The board version connects to its Case tamper board. Device authentication and encrypted communication protect the system against substitution.
Test the tamper at the finished installation. Connection-loss and jamming alerts depend on configured supervision and an available communication path.
Control the system from one interface.
Permissions follow the person
Use Ajax apps to arm permitted groups, review events and manage supported settings. Administrator and PRO permissions define who can configure equipment; photo access is managed separately where supported.
Remote app access needs the hub’s connection to Ajax Cloud. Cameras use their own network and recording arrangement: the hub is not an NVR and does not store a continuous video archive.
Prepare the site before leaving it unattended.
Connect and identify
Fit the selected internal or external source, prepare the SIM service and add the hub through its QR code in an Ajax app.
Find the right hub.
Choose the control panel for your alarm system. Compare device connections, alarm photos, internet routes and power for the exact hub version.
Compare hubs →Every detail, in one place.
Capacity
- Ajax devices
- up to 100 Specifically: up to 5 range extenders; up to 10 sirens; up to 50 keypads with a built-in buzzer.
- Users
- up to 50 Any number of admin users within the hub limit. PRO accounts for installers. PRO accounts for installation and monitoring companies.
- Automation scenarios
- up to 32 By alarm. By schedule. By arming/disarming. By temperature, humidity, CO 2 concentration. By pressing Button. By touching LightSwitch.
- Security groups
- up to 9
- Rooms
- up to 50
- Event log
- up to 1,000 events Events are saved in the non-volatile onboard flash memory.
Wireless communication
- Jeweller communication technology
- Proprietary wireless communication technology to transmit commands, alarms, and events. Key features: Two-way communication. Advanced sabotage protection. Block encryption featuring a dynamic key. Instant notifications. Remote control and configuration in Ajax apps.
- Frequency bands
- 866.0–866.5 MHz 868.0–868.6 MHz 868.7–869.2 MHz Depends on the sales region.
- Maximum effective radiated power (ERP)
- up to 25 mW Automatic power control to reduce power consumption and radio interference.
- Radio signal modulation
- GFSK
- Radio communication range
- up to 2,000 m Between the hub and the devices added to it in open space. The maximum range depends on the added device.
- Polling interval
- from 12 s to 300 s Adjusted by a PRO or user with admin rights in Ajax apps.
- Encrypted communication
- All stored and transmitted data are protected by block encryption featuring a dynamic key.
- Frequency hopping
- To prevent radio interference and jamming.
- Wings communication technology
- Proprietary wireless communication technology to transmit photos. Key features: Two-way communication. Advanced sabotage protection. Block encryption featuring a dynamic key. Data packet reload in case of transmission errors. Photo delivery check.
- Frequency bands
- 866.0–866.5 MHz 868.0–868.6 MHz 868.7–869.2 MHz Depends on the sales region.
- Maximum effective radiated power (ERP)
- up to 25 mW Automatic power control to reduce power consumption and radio interference.
- Radio communication range
- up to 2,000 m Between a hub and connected devices (in an open space). The maximum range depends on the connected device.
- Encrypted communication
- All stored and transmitted data are protected by block encryption featuring a dynamic key.
- Frequency hopping
- To prevent radio interference and jamming.
Communication channels
- Cellular
- 2 × micro SIM slot
- Cellular bands
- 2G GSM900/DCS1800 (B3/B8) 3G WCDMA 850/900/2100 (B1/B5/B8) 4G (LTE) FDD B1/B3/B5/B7/B8/B20
- Automatic switching between communication channels
- between SIM cards — up to 4 minutes
- Communication channel prioritization
- Slot 1 for micro SIM Slot 2 for micro SIM
- Auto APN
- The APN auto select feature allows setting the access point automatically based on the installed SIM card.
- External antenna connectors
- Jeweller Wings 4G (LTE) The system will notify users if the antenna is damaged. ExternalAntenna is sold separately.
- Alarm transmission system category
- SP5
- Control panel operation method
- pass-through
- Signaling security
- S2 Substitution security.
- Information security
- I2
Notifications
- Notification types
- Push notifications SMS Calls
- Event types
- Alarms Video detections Malfunctions Armed modes System events Non-security alerts Automation devices Smart lock events Doorbell ringing Notification types are configured individually for each user. The notifications can be customized for A–D schemes according to EN 50131 requirements.
Photo verification
- Photo verification types
- Photo by alarm Photo by scenario Photo on demand Photo by schedule Photo by arming/disarming Photo by anti-masking Photo by tamper alarm Photo by magnetometer The Photo by schedule feature is available for hubs with OS Malevich 2.19 firmware or later.
- Photo delivery time
- up to 9 s By default.
- Photo resolution
- up to 960 × 720 pixels Depends on the detector.
- Number of photos in a series
- from 1 to 5
Monitoring
- Supported protocols
- SIA DC-09 (SIA-DCS) SurGard (Contact ID) ADEMCO 685 Other proprietary protocols
- Event types
- System alarms and events Panic button coordinates Photo verification
Power supply
- External
- 4.2–16 V⎓, up to 2 A Zinc-air battery or external power source.
- Internal
- 4.2–16 V⎓, up to 2 A Rechargeable lead-acid and LiFePO4 batteries (not included). Non-rechargeable LTC batteries (not included).
- Device operating DC voltage range
- 3.5–16 V⎓
Autonomous operation
- On an external battery in full function mode
- up to 18 months On a 12 V⎓, 600 Ah, non-rechargeable zinc-air external battery (not included).
- On an external battery in Battery saving mode
- more than 5 years On a 12 V⎓, 600 Ah, non-rechargeable zinc-air external battery (not included).
- On an internal battery in Battery saving mode
- up to 23 months On a 7.2 V⎓, 95 Ah, non-rechargeable LTC Internal battery NB (7.2V/95Ah) (not included). up to 8 months On a 6.4 V⎓, 36 Ah, rechargeable LiFePO4 Internal battery RB (6.4V/36Ah) (not included). up to 2 months On a 12 V⎓, 7 Ah, rechargeable lead-acid internal battery (not included).
Sabotage protection
- Tamper alarm
- The system sends notifications of attempts to open the hub casing lid or detach the casing from the surface.
- Protection against spoofing
- device authentication
- Frequency hopping
- The hub sends notifications of jamming or connection loss with the devices to all users and the monitoring company.
- Jamming alert
- Hub BP Jeweller analyzes the noise level in the channel and the communication quality with the added devices and sends a notification in 30 seconds.
Casing
- Dimensions
- 196 × 238 × 100 mm
- Weight
- 1.01 kg
- Operating temperature range
- from −10 °C to +40 °C
- Operating humidity
- up to 75%
- Protection class
- IP40
What’s in the box
- Hub BP Jeweller
- Casing
- Installation kit
- Quick start guide
For your installation
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- Hub BP Jeweller is designed for indoor use only.
- Choose the exact version: sensing, power, casing, pack size or interface details can differ between the listed models.
Optional additions
Product documents.
Find the right protection.
Batteries
Match the approved battery type, enclosure space and hardware revision.
ExternalAntenna
Choose the correct communication channel and mounting position.
Case E (395)
For the supported board version, with the correct holders and installation conditions.