MAKE IT YOURS
Holder.
Fastener to fix a button on a surface

Keep the button in reach.
Holder fixes a compatible Ajax button where it is easy to reach, while letting you detach it in one movement. Mount it beside a bed, near a door or under a desk, according to the button’s intended use. It is a passive fastener; the separately purchased button provides the alarm or automation function.
Key features. At a glance.
Fits supported buttons
Button · Superior Button · DoubleButton
Tool-free removal
Clip in or detach the button
Two fixing methods
Screws or double-sided tape
Two finishes
White or black
Made for real installations.




A fixed place. Still easy to take with you.
For the supported Ajax buttons
Holder keeps Button Jeweller, Superior Button Jeweller or DoubleButton Jeweller within reach. The button clips in and lifts out without tools, so it can move between a fixed position and portable use.
The button is sold separately. Its own configuration determines panic or automation behaviour; Holder adds no radio, alarm or control function.
Fix the holder where it is easy to reach.

Screws or double-sided tape
Choose an accessible position, check that the button communicates with its hub from there, then secure Holder using two screws or the supplied double-sided tape. Clip the button into place and confirm it can be operated and removed comfortably.
Follow the button’s manual and arrange the alarm test with the system owner. Holder is specified for −10 to +40 °C and up to 75% humidity; a button’s higher protection rating does not extend the holder’s limits.
Find the right button holder.
Check Holder against the button you want to mount.
Check compatibility →Every detail, in one place.
Devices compatibility
- Devices compatibility
- Button Jeweller; Superior Button Jeweller; DoubleButton Jeweller
Key features
- Button fixing
- Fix Holder in a place where the button is easy to access.
- Quick installation and removal of the button
- The button is attached to Holder and detached from it in one movement. There is no need to use tools or waste time.
Enclosure
- Material
- Plastic
- Dimensions
- 47.1 × 37.9 × 14.2 mm
- Weight
- 3.5 g
- Operating temperature range
- from –10 °C to +40 °C
- Operating humidity
- up to 75%
What’s in the box
- Holder
- Installation kit
- Quick start guide
For your installation
- The exact host model and accessory version matter. Check the compatible equipment before ordering; a similar shape or product name does not establish fit.

