MAKE IT YOURS
DoorProtect.
Wireless reed-switch opening detector
Standards and certifications
DoorProtect Jeweller · DP.Y.J. Manufacturer-listed marks; regional and installation conditions apply.
Know when a door or window opens.
DoorProtect Jeweller monitors the position of a door or window using a detector and magnet. An opening becomes an event in the Ajax system, helping protect entrances and other accessible openings. Its compact two-part design fits around the frame, with the installation gap chosen for reliable detection.
Key features. At a glance.
Durable reed switch
in a plastic capsule
Chime feature1
More installation options
with 2 magnets included
Up to 7 years of operation
on a pre-installed battery
Remote control and configuration
Terminals to connect a third-party detector with an NC contact type
2 colors
of glossy enclosure
Informative push notifications
Up to 1,200 m2
of wireless communication with an Ajax hub or range extender
Power adjustment
Hassle-free installation
- 1The Chime feature requires an Ajax siren to operate. Learn more about Chime.
- 2In an open space. Range is measured in open space; walls and installation conditions reduce it.
Ajax product information ↗ · DoorProtect Jeweller specifications ↗
Protection in real places.
DoorProtect Jeweller
Every detail has a purpose.
Explore the function, installation and system requirements of DoorProtect Jeweller.
Loading detail…
Know when an opening changes.
Opening detection
A reed switch registers when the supplied magnet moves away. Mount the detector and magnet on the correct fixed and moving parts, keeping the closed-position gap within the manual’s limits.
DoorProtect detects opening. It does not provide the built-in shock and tilt sensing of DoorProtect Plus.
Bring an additional contact into the system.
External NC input
The detector’s terminals can accept a supported third-party wired detector with a normally closed contact. An installer checks its contact type, wiring and event behaviour before connecting it.
DoorProtect cannot power a third-party detector. Supply any required power separately.
Know when a visitor arrives.
Chime while disarmed
Together with a compatible Ajax siren, the opening detector can announce a door opening while the system is disarmed. Different short patterns can identify different entrances.
Chime requires an Ajax siren and configuration; the opening detector itself does not sound the notification.
Power for everyday protection.
Replaceable battery power
A replaceable preinstalled CR123A battery supports up to seven years of operation. Check battery state in the app and keep access for servicing.
Battery life depends on settings, use, temperature and signal conditions. Respond to the app’s low-battery notification.
A secure link to your system.
Jeweller communication
Jeweller carries alarms, status and commands between this detector and a compatible hub or range extender. The two-way link uses encryption and device authentication.
The stated range is up to 1,200 m in open space. Walls, metal and the actual installation reduce usable coverage.
Reach the areas your system needs.
Plan around walls and distance
Test the signal where the detector will be installed. If coverage is insufficient, select a compatible range extender; an Ethernet-equipped model provides another route back to the hub.
Range extenders are optional equipment. Check supported models and quantities against the exact hub before planning coverage.
Know that protection is working.
Device state in the app
The detector reports its condition to the hub. Communication, power and tamper information help identify a device that needs attention. Clear device and room names make an alert easier to act on.
Professional alarm monitoring is a separate service. Notification and connection-loss timing depend on system settings and connectivity.
Protection that also watches itself.
Removal alerts
The tamper reports attempts to remove the detector from its mounting panel. Secure the mounting arrangement and check that the event reaches the intended users.
Authenticated communication
The hub checks the detector’s identity during communication. Encryption protects the exchanged data, while authentication helps reject a device attempting to impersonate it.
Installed for your actual space.
Connect
Scan the device QR code to add it to a compatible hub. Assign a clear name and the room or area where it will operate.
Find the right opening detector.
Compare protection for doors and windows across Baseline, Superior and Fibra. See which events a detector can notice and how it fits your frame, wiring and everyday use.
Compare opening detectors →Every detail, in one place.
Communication
- Jeweller communication technology
- Two-way system communication for the functions specified for this model.
- Radio signal range
- up to 1,200 m Between detector and control panel (or range extender) in an open space.
- Encrypted communication
- Encrypted device communication.
- Frequency hopping
- Radio communication uses frequency hopping to prevent interception and jamming.
Detection
- Sensitive element
- 1 reed switch
- Magnets
- small and big one come in the set The small magnet operates at a distance of up to 1 cm from the detector, and the big magnet — up to 2 cm. Attach the magnet on the right side of the detector.
- Protection against reed switch chattering
- The detector ignores vibrations lasting up to 0.15 s.
- Input to connect an additional detector
- Wired detector with the normally closed (NC) contact type.
- Chime
- When the system is disarmed, the siren makes a special sound to notify that the opening detectors are triggered.
Sabotage protection
- Tamper alarm
- Notifications on attempts to detach the detector from the surface or remove it from the mounting panel.
- Protection against spoofing
- device authentication
- Communication loss detection
- after 36 s Depends on the Jeweller or Jeweller/Fibra settings.
Power supply
- Battery
- 1 × CR123A Pre-installed.
- Calculated battery life
- up to 7 years
- Full battery capacity
- 1,600 mAh
Enclosure
- Detector dimensions
- 90 × 20 × 20 mm
- Dimensions of the big magnet
- 90 × 20 × 20 mm
- Dimensions of the small magnet
- 55 × 11 × 6 mm
- Detector weight
- 29 g
- Operating temperature range
- from −10 °C to +40 °C
- Operating humidity
- up to 75%
- Protection class
- IP50
What’s in the box
- DoorProtect Jeweller
- SmartBracket mounting panel
- CR123A battery (pre-installed)
- Big magnet
- Small magnet
- Outside-mounted terminal clamp
- Installation kit
- Quick start guide
For your installation
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- Do not install the detector using both magnets at the same time. The detector recognizes only one magnet on one side of the detector. Attach the magnet to the moving part of the door (window) to the right of the detector. The side to which the magnet should be attached is marked with an arrow on the detector’s enclosure. The device is designed for indoor use only.
Find the right protection.
DoorProtect Plus Jeweller
Explore the version that also detects impacts and changes in angle.
MotionProtect Jeweller
Explore indoor motion detection alongside protection for doors and windows.