Relay Jeweller
For an independently powered control circuit.
MAKE IT YOURS
DIN Holder.
Bracket to fix Relay or WallSwitch on a DIN rail
Mount the relay neatly on a DIN rail.
DIN Holder holds a compatible Relay or WallSwitch in a DIN-rail installation. It helps organise the control module alongside other electrical equipment in the enclosure. The bracket supports the mounting arrangement while the installer remains responsible for the electrical connections and clearances.
Key features. At a glance.
Tool-free mounting
Mechanical installation of the holder and matching relay.
35 mm DIN rail
Fits Relay or WallSwitch, sold separately.
A compact rail assembly
Sized alongside standard rail-mounted equipment.
Accessible local control
Operate the relay through the front button.
Passive ventilation
Openings allow circulation around the fitted relay.
Circuit labels included
Identify the equipment controlled by each relay.
Made for real installations.
A defined place for a small relay.
One narrow rail position
DIN Holder supports Relay or WallSwitch on a standard 35 mm DIN rail. With the relay fitted, the manufacturer compares its width to a single-phase circuit breaker.
The holder is 52 × 41 × 18 mm and weighs 9 g. The relay is sold separately; DIN Holder is not specified for MultiRelay.
Keep local control accessible.
A button at the front
The holder’s built-in button operates the installed relay. In bistable mode it reverses the contact state; in pulse mode it triggers the configured pulse.
It acts on the fitted Relay or WallSwitch function button. The holder has no independent radio connection or power supply.
Leave room for heat to escape.
Passive ventilation
Openings in the holder support air circulation around the fitted module. Plan spacing and enclosure conditions around the relay and its connected load.
DIN Holder is specified for −25 to +60 °C. The installed relay’s limits and the actual enclosure conditions still apply; the holder does not add active cooling.
Clip the holder onto the rail.
Tool-free mechanical fitting
Fit the matching Relay or WallSwitch into the holder, then secure the assembly to the 35 mm rail using the side hinges. The included stickers help identify the controlled circuit.
Tool-free describes the holder’s mechanical attachment. Wiring and work inside the electrical enclosure still require the appropriate installer and isolated circuits.
Find the right relay holder.
Check DIN Holder for Relay or WallSwitch on a 35 mm rail. Review the exact device fit and space inside the electrical enclosure.
Check relay mounting →Every detail, in one place.
Casing
- Dimensions
- 52 × 41 × 18 mm
- Weight
- 9 g
- Operating temperature range
- from −25 °C to +60 °C
- Operating humidity
- up to 75%
- Material
- Polycarbonate
What’s in the box
- DIN Holder
- Sticker set
- Quick start guide
For your installation
- The holder is mounted on a 35 mm DIN rail using side hinges on the casing. No tools required.
Complete your installation.
WallSwitch Jeweller
For a suitable 110–230 V AC load.