MAKE IT YOURS
Curtain Outdoor.
Wireless dual-technology curtain motion detector for outdoor and indoor use
Standards and certifications
Curtain Outdoor Jeweller · CO.Y.J. Manufacturer-listed marks; regional and installation conditions apply.
Protect the boundary before the entrance.
Curtain Outdoor Jeweller creates a narrow motion-detection zone along an approach, facade or opening. Two PIR sensors and K-band microwave verification help distinguish an intrusion from thermal interference. Adjustable range, standard and Pet modes, and anti-masking protection let the installation match the site.
Key features. At a glance.
Vertical viewing angle:1
Adjustable motion detection range
Hood
to protect masking sensors from rain and snow
Horizontal viewing angle: 8°
Dual motion detection technology
to trigger the device only when both types of sensors detect motion
Software algorithm to distinguish human movement from thermal interference
Temperature compensation
for effective detection in heat and cold
Can be fixed to a third-party mount
Pet immunity2
as an optional detection mode
Tamper
Anti-masking system
Accelerometer
Up to 3 years3
of operation on pre-installed batteries
Enclosure protection
Over-the-air firmware updates
Up to 1,700 m4
communication range with an Ajax hub or range extender
Power adjustment
Informative push notifications
Remote control and configuration
Optional angle mount
to install the detector sideways
Holding screw
Hassle-free installation
- 1Depends on the installation height. The angle is 85° at 2.4 m and 15° at 1 m.
- 2Mount at 1 m, use the physical Pet position and matching app mode. Up to 100 cm tall under correct installation conditions.
- 3Actual battery life depends on activity, temperature, polling settings and radio conditions.
- 4In open space. Range is measured in open space; walls and installation conditions reduce it.
Ajax product information ↗ · Curtain Outdoor Jeweller specifications ↗
Protection in real places.
Curtain Outdoor Jeweller
Every detail has a purpose.
Explore the function, installation and system requirements of Curtain Outdoor Jeweller.
Loading detail…
A narrow boundary before the entrance.
An adjustable curtain up to 12 m
An 8° horizontal field protects a narrow approach along doors, windows or a facade. Set the range using the enclosure slider and matching app settings.
Test the entire intended approach. Avoid passing traffic, vegetation or other objects that should stay outside the protected area.
Choose the mode for the installation.
Standard detection
Use Near or Far settings for standard detection at the recommended 2.4 m height.
Confirm motion with two technologies.
PIR detection
Two PIR sensors detect thermal movement in the curtain-shaped zone.
Tune the response to the surroundings.
SmartDetect analysis
The software checks thermal pattern size, movement and intensity before classifying a trigger.
Power you can keep track of.
Replaceable batteries
Two preinstalled CR123A batteries provide up to three years under the specified conditions. The app reports battery status and low-charge warnings.
IP55 enclosure for indoor or outdoor use, −25°C to +60°C. Activity, placement, polling and radio conditions affect battery life.
A secure link, with remote firmware updates.
Jeweller events and Wings updates
Jeweller carries alarms, device status and configuration. Wings carries firmware updates on this model; it does not add a camera or photo verification.
Up to 1,700 m in open space. When connected through the original ReX, firmware updates are unavailable because it does not support Wings.
Reach rooms beyond the direct radio link.
Plan the complete communication path
A compatible assigned range extender can connect a detector where the direct hub link is weak. Test the detector-to-extender path and the extender-to-hub path at their installed positions.
A range extender increases coverage, not the hub’s total device capacity. Ethernet on a supported extender is its connection to the hub; the detector itself stays wireless.
Keep the view and mounting under supervision.
Anti-masking
The detector reports attempts to block its view, including the masking methods listed in the manual.
Check anti-masking after installation. Fit the hood to protect the masking sensors from precipitation.
Movement alerts
An enabled accelerometer reports attempts to shift the mounted device.
Enable and test it when using the relevant alternate mount.
Removal and communication alerts
The tamper monitors the mounting panel; the hub also checks connection and device state.
Connection-loss detection depends on polling settings.
Set up for the way the site works.
Connect
Scan the device QR code in the Ajax app, then assign a recognisable name and room. Check compatibility with the hub and any range extender before installation.
Find the right motion detector.
Compare indoor, outdoor and curtain detectors across Baseline and Superior. See what changes for the place you protect, alarm photos, animals and installation.
Compare motion detectors →Every detail, in one place.
Communication
- Jeweller communication technology
- Two-way system communication for the functions specified for this model.
- Radio communication range
- up to 1,700 m Between the detector and a hub (or a range extender) in an open space.
- Encrypted communication
- Encrypted device communication.
- Frequency hopping
- To prevent radio interference and jamming.
- Wings communication technology
- Two-way system communication for the functions specified for this model.
- Radio communication range
- up to 1,700 m Between the detector and a hub (or a range extender) in an open space.
- Encrypted communication
- Encrypted device communication.
Detection
- Sensitive elements
- 2 × PIR sensors 1 × K-band microwave sensor K-band microwave sensor to prevent false alarms caused by thermal interference.; Operation frequency: 24 GHz.
- Motion detection distance
- up to 8–12 m When installed at a height of 1–2.4 m. Adjusted with a slider at the detector enclosure.
- Motion detection angles
- horizontal: 8°; vertical: 85°/75°/15° Depends on the installation height.; The angle is 85° or 75° at 2.4 m and 15° at 1 m.
- Motion detection speed
- 0.3 to 2.0 m/s The direction of the detector lens should be perpendicular to an alleged intrusion path into the facility.
- Sensitivity
- 3 levels Adjusted by a PRO or a user with admin rights in the Ajax apps.
- Pet immunity
- height: up to 100 cm; weight: irrelevant The detector should be installed at a height of 1 meter, and the slider on its enclosure should be set to the Pet position.
- False alarm prevention
- Dual motion detection technology SmartDetect Software algorithm.
Sabotage protection
- Tamper alarm
- Notifications on attempts to detach the detector from the surface or remove it from the mounting panel.
- Protection against spoofing
- device authentication
- Anti-masking system
- detects attempts to block the detector view
- Accelerometer
- alarm when the detector is moved Must be activated when the detector is installed on third-party brackets.
- Holding screw
- To secure the detector on SmartBracket or hood.
- Communication loss detection
- within 36 s Detection time depends on the Jeweller settings.
Power supply
- Battery
- 2 × CR123A Pre-installed.
- Calculated battery life
- up to 3 years
- Detector’s operating voltage range
- 4.1−6.2 V⎓
- Full battery capacity
- 1,600 mAh
Enclosure
- Dimensions with hood
- 155 × 77 × 85 mm
- Dimensions with hood and angle mount
- 155 × 84 × 98 mm
- Dimensions without hood
- 141 × 60 × 72 mm
- Dimensions without hood and with angle mount
- 141 × 76 × 84 mm
- Weight with hood
- 299 g
- Weight without hood
- 223 g
- Weight of angle mount
- 34 g
What’s in the box
- Curtain Outdoor Jeweller
- SmartBracket mounting panel
- 2 × CR123A battery (pre-installed)
- Angle mount
- Hood
- Installation kit
- Quick start guide
For your installation
- Confirm the supported control panel, device software and regional radio version; test coverage at the final installation position.
- Install Curtain Outdoor Jeweller at 2.4 m for Near or Far mode. For pet immunity, install it at 1 m and select the corresponding Pet mode on both the device and in the app. Test the detection area at the final position.
- The device is designed for indoor and outdoor use.
- Install the hood to protect the detector’s anti-masking system from rain and snow.
Find the right protection.
Curtain Outdoor Mini Jeweller
Match the detection distance, mounting position and pet mode to the entry point.
CurtainCam Outdoor HighMount (PhOD) Jeweller
Compare a curtain detector with photo verification and 2–4 m mounting.